Hello everyone! We continue the topic of decorating your home on the eve of the New Year holiday. And today I want to offer you to try to make a homemade accessory - wreath. This is a very bright product that will attract the attention of each guest and will create a truly festive atmosphere.
And such an exercise is performed easily and simply, it does not take much time, and at the same time any healthy materials and decorative means are going to move. Here the most important thing is to learn how to make a framework, that is, the basis for the New Year's wreath.
The frame can and buy, for example, use foam form or hoarse, or make it yourself of paper, cardboard, wire or tissue. For decorating, the following accessories are well fit: tinsel, rain, fabric, christmas toys, bumps, sprigs spruce, cuts from newspapers and postcards, ribbons, etc.
Also remember that this item is most often used to decorate the doors, so do not forget about the method of fastening products.
The usual round wreaths are now fashionable to replace on unusual forms, such as stars and hearts. Therefore, think in advance the form for your product. Be sure to follow and what accessories are chosen to decorate such a craft. After all, the scenery should complement your entire interior.
Rather, proceed to reading today's release and then learn in detail about how and from what you can make wreaths for the New Year and Christmas.
In addition to the door of the wreath you can weigh on the walls and shelves.
How to make a New Year's wreath do it yourself from tinsel
Now I will tell you how to make such an accessory using a tight cardboard and tinsel, as well as Christmas balls.
I also want to say that in such products, decor elements need to be combined according to the colors so that they do not contradict each other, but on the contrary, complemented.
You will need:
- tinsel three shades;
- Dense cardboard;
- Christmas toys and other decorations;
1. From dense cardboard, cut the bagel of the desired size. Next, lay on it Christmas toys and other decorations in the sequence as you like.
2. Now secure them with a scotch.
3. Next, take Mishuur and secure it with the end of the back of the bagel scotch.
4. Corrected by Mishur wander all the product in a circle.
5. Then wrap below the craft of another color of the Misher.
6. And for the third time, turn a misher wreath of another color. You can use tinsel to Mishur Potton. And do not forget the ends of Mishura fasten.
7. Next to your taste, decorate the product, for example, wrap a golden cord or silver rain. Secure the loop from a woven cord to be able to hang your beauty.
After you learn how to make a frame of cardboard, I suggest a little complicate the work and try to perform the basis of the newspaper and fabric.
You will need:
- kitchen napkins;
- green organza (if necessary);
- PVA glue or hot glue;
1. From the sheets of newspaper twist the tube and make the ring. Wrap it by several more sheets so that it becomes durable. The edges of the newspaper can be glue.
2. Now the resulting ring is wrapped with white paper napkins.
3. Next, wrap or fasten the tissue with glue.
4. After fixing the tip of the Mishura and wrap it all the ring in a circle. The tip will fix again.
5. Reduce your product at your discretion.
And now options for finished works using tinsel.
Christmas wreath of fir branches and cones on the door
I love very much when natural materials are used in the crafts, especially cones and fir branches. First, such work looks always naturally and elegantly, and secondly, the coniferous smell from such products is around the house.
So let's now try to perform a wreath using cones and twigs. And the foundation will learn how to make a foam base and fabric.
You will need:
- Form base from dad mache or foamflast (or cardboard bagel);
- Decorative wide ribbon;
- Decorative twigs with beads;
- sprigs fir with bumps;
- Large artificial flower (Puansettia - "Christmas Star");
- pins, scissors;
- Hot glue gun.
1. Take the basis and fasten the decorative tape on the back side with the pin. Tightly wrap the basis.
2. As soon as you completely hide the foundation, fasten the tape with a pin from the inside.
3. Now prepare elements for decorating.
4. First fasten the twigs with beads.
5. And then fir branches with cones.
6. On top of the twigs stick the flower.
Or another way of making the base from the wire.
You will need:
- fir branches;
- Durable black rope;
- New Year's toys.
First, make the round frame of the required size from the wire. Then create magnificent bundles of fir branches, and at the base, tie them to black thread at the base. Then fasten the harvested bundles on the frame. Next decorate your creation, using toys, bows, ribbons. Tie a loop.
But the detailed master class on the manufacture of a New Year's wreath from the purchase frame.
You will need:
- Ready or homemade frame (you can use wooden hoops);
- twine or twine;
- All sorts of decorations;
- Adhesive gun, scissors.
1. Take fir sprigs and start them to fix them on the frame in the direction from ourselves on the right side. The twigs fasten the rope by tie to three nodes. At the same time, do not cut the thread, but wrap through the frame and fix all other branches in the same way.
2. And at the very end, the rope tie to the nodule and fix with hot glue. Make a loop.
3. Now spread the decorations and determine the place on the product. Get decor. Everything is ready!
And I propose to look at the photo samples.
Master class on the manufacture of wreath from balls
And now an interesting way to create accessories from Christmas balls. As a basis, take a circle of foam. You can make a frame from the already considered options.
You will need:
- base of foam;
- Christmas balls;
- paints in the canoe;
- Adhesive pistol.
1. Take the basis of the foam and cover it with gray paint. Dry the product.
2. Now inside, glue small balls in size.
3. And outside, on the contrary, more larger.
4. Next, glue small balls across the basis. Make a loop from the ribbon and secure it on the reverse side.
Balls can be used different not only in size and color, but also of different textures (matte, glossy, shiny).
Another creative idea. Can take advantage of it.
You will need:
- wide tape;
- Factory New Year's balls;
- Adhesive pistol.
Metal wire make a round frame. Then, ride the christmas balls on the wire, while glue them initially to metal hetrels. Decorate a ribbon ready for the craft.
Samples of finished scenery this time do not throw off, as they are all identical.
We make a wreath for the new year of paper
And we have another way to create products from ordinary paper. Such creativity will be interesting and kids, so be sure to attract them to the process.
By the way, the bagel will be mastered from newspaper tubes.
You will need:
- PVA glue;
- acrylic paint (white);
- Paper for scrapbooking, color or wrapping paper;
- pictures on dense sheets (with old postcards, packs, boxes);
- Various other decorations.
1. The newspaper sheets twist into thin tubes. The tips of the newspaper glue PVA glue. The number of newspaper tubes will depend on the thickness of your product.
2. Now take any round item and wrap it with pipes in several layers. All pipes lubricate glue. When you lay out all the tubes, then the entire design is lubricate the PVA glue and let it be good.
3. After drying, remove the workpiece from the round item and paint the base of white paint.
4. Next prepare decorations. They can be independently cut from colored or wrapping paper, use scrap decorations or pictures from old postcards.
5. Place them on the product, and then glue.
6. Additionally, the cracker can be decorated with sequins or beads.
Now I'll tell you and show how to make such a beauty from the cardboard.
You will need:
- Colored paper, color cardboard or paper with pattern;
- cardboard (for the basis);
1. Take a white cardboard. Circuit on it a round form. Cut the circle.
2. Then inside circle a round shape, but already smaller diameter.
3. Cut the middle.
4. From color cardboard cut the details in the form of petals.
5. Twist each petal at the base.
6. Start sticking the petals to a cardboard basis.
7. Give the details close to each other, forming a twig.
8. Thus, swipe the whole base.
9. And at the end, glue the shell ribbon.
As you can see, everything is very easy and simple. Check out more ideas? Then catch!
As a basis for crafts, you can take a conventional paper plate. Cut the inner circle and decorate.
How to sew a New Year's wreath of felt + patterns
In addition to conventional and familiar options, it is also possible to use felt and fabric. At the same time, you can also sew the foundation base and fill it with syntheps. Or use frames from twigs, paper and other materials, but the decorations themselves still sew.
I liked the following option. I share with you.
You will need:
- foam base;
- fluffy threads of green color;
- ordinary sewing threads;
- glue pistol;
- Felt of different colors;
- fabric patterned different colors;
- chalk for fabric;
- Cardboard stencil figures: heart, snowman, Christmas tree, bell, etc.;
- Elements for decor: ribbons, buttons.
1. Take the foundation, lock the fluffy thread and carefully, without glimpses, wrap it with it throughout the circle.
2. The end of the thread will fasten with glue, and the VILLIN hop up.
3. Circuit on the stencil on the felt of a larger heart, cut it out (2 pcs.).
4. On the tissue, circle a smaller heart, also cut it out (1 pc.).
5. Now the small heart of the fabric attach to the large heart of the felt and take it carefully.
6. Connect the parts of the big heart, start stitching with each other. Then fill in the syntheps and sew blank to the end.
7. Next, in the same way, we wish any figures. It may be snowmen, men, bells, etc. Decorate them with ribbons, beads, sequins.
8. Adjust all stitched figures to the fluffy basis.
9. Also tie a bows from satin ribbons and decorate the craft.
Or choose from the following work.
And of course the schemes, patterns and patterns for needlework.
New Year's wreath with her hands from the hanger. Step-by-step instruction
I want to share another interesting idea. We will take the usual metal hanger. Thanks to her, your frame will be durable and even heavy attributes will withstand, plus the loop will be ready. So, you will not need to invent from what to do it and how to fix it.
You will need:
- Tolstoy wire hanger;
- Candy (lollipops or hallee);
- Double-sided tape.
Take a hanger and form a circle from it. You have a durable framework, and the "Ushko" is a mount for the suspension. Coccele fasten the bracket on the frame and in turn, tie it with candy it. Candies must fully close the entire wire. Finished product decorate a ribbon.
You can also attach small scissors to a wreath, so that everyone can cut off the candy and emit it.
But beauty from the balls. You can also use tinsel and stitched figures.
Video selection of what wreaths can be made at home from girlfriend
And at the end, try to make such a sweet cradle. I think this decoration is perfect for the decor of the children's room.
You will need:
- corrugated cardboard;
- two objects of round form of different diameters;
- acrylic paint;
- double sided tape;
- Candy in brilliant wraps.
1. Take the cardboard and circle a round form of a larger diameter on it. Cut it.
2. Then inside a big circle a small circle. You can also take advantage of the circulation. Cut the middle.
3. Make even exactly the same basis (repeat item 1 and paragraph 2). Shaw two parts with each other.
4. Next Paint the frame of white paint. Dry.
5. Then cut the foam rubber to pieces and poke the finished frame.
6. Now tightly wrap the base of the bandage.
7. Next prepare candy. Truffles are best. At their base, glue pieces of bilateral scotch.
8. And then put the entire frame with candies.
9. Well, in conclusion, fill in the empty places with tinsel or beads. Fix them to glue.
And, as promised, a selection of interesting and most creative ideas for your creativity.
Now you know how and what can be made of New Year's wreaths from girlfriend. There will be no difficulty in such work, and the process will deliver one pleasure, the result will delight the eye. Use the following memo and everything will work out!
- Create or buy a frame of the desired shape and diameter;
- Secure the main material on the frame to which the decorations will be attached in the future;
- Make a loop for the possibility of fastening the wreath;
- Reduce the product with any girlfriend.
I wish you all the best. Holiday greetings!
How to make a wreath for the New Year with your own hands from tinsel, and also to have a good time and to get a new year mood, you can learn from this article. Mishur is a popular New Year attribute that gives a special atmosphere of the holiday and the premonition of something magical. Practically in any stores before the holidays there are many tinsel different in shape and color. Nothing should be purchased this decoration and start needleful.
Usually a wreath is hanging on the door, which symbolizes the common holiday of the holiday.
By tradition, a Christmas wreath was decorated with candles, which were lit on Sundays in the pre-Christmas post (only 4 candles), which symbolized the waiting of Christmas. Subsequently, a symbolism was added to the symbol of a circle as an infinite life and land, and a symbol of four candles, like four sides of the world. As a result, a Christmas wreath acquired a sacred meaning of eternity and universal expectations of a bright Christmas holiday.
Wreaths, although lost its best meaning, moved to Russia simply as a beautiful decoration to the New Year and Christmas. Few people know that the wreath of Catholic customs decorate with candles and that it usually consists of a fir branches (evergreen tree - also a symbol!). For the Russians, a wreath is a reason to make the subject of decoration of living rooms, restaurants, houses.
This master class is dedicated to a homemade wreath for the new year from Mishura and other subframe materials.
Start your needlework
Mishura turns out a simple and elegant wreath, which is not difficult to make even a child.
As a basis, you can take any round item on the type of bagel - the hoops connected to the wire ring or twig, a special foam blank. In the end, it can be sewed, for example, from a felt, filling with a synthet, or cut out of cardboard. The main thing is to take into account the weight of all decorative elements.
To create such a decoration, the following materials and tools are needed:
- Mishur (you can several different colors);
- Christmas toys and another decor (ribbons, beads);
- glue pistol;
- Paint or sparkles (if necessary).
- On a round basis, for example, carved from a cardboard, large decorative decorations are mounted - balls, candy, beads;
- The base is wounded by the Mishuroy so that decorative elements can be seen;
- All naked places are closed (where you can see the basis) a thinner tinsel (you can take another color);
- The loop is placed behind, so that you can hang a wreath.
This is the main algorithm for crafts of wreath from Mishura. Of course, depending on the material, the basics, as well as the desired result, there are some nuances. For example, for convenience, you can first wrap a tinsel to the decor, and then turn the foundation for a decorated tinsel. For example, you can wrap Mishuur Beads.
In addition, if the wire is taken as the basis, then first it is possible to drive balls and other Christmas decorations on it, and empty places also decorate tinsel.
Decorative elements can be attached to the scotch, wood or threads.
The main thing is not to drag, so as not to deform Mishuur, it should look puffy.
From above with the front side of the loop, for which the wreath is attached, can be decorated with a bow of red, white, blue or other color.
It is important that all elements are well combined both in color and by texture. For example, brilliant and glossy red and blue balls and beads are well suitable for green matte tinsel. A brilliant blue or blue tinsel will be gently combined with white and yellow balls and figures. The main thing is not to overtake the stick, because the decor should not be too much and all decorative elements should be combined with each other. You can inspire photo wreaths:
It is worth paying attention to the "winter" colors - blue, blue, purple, white, silver.
New Year's wreath can be made not only from tinsel, but also from paper. Of this simple material, beautiful festive wreaths are obtained. Make them easy, you will need only scissors, glue, cardboard base and sheet paper sheets.
Wreaths made from paper blanks on one template are very beautiful. They can be made independently, they do not need to be complex form. Leafs (like lavelice), asterisks, strips, flags - these are basic simple figures.
The cut out figures must be glued to the base with rows in a circle so that one row close the previous one. You can start from the center to the edges, but you can go with one or both sides at the same time. Complete the composition preferably a bow and other decorative elements. Rear must be glued to a small loop to hang a ready wreath.
Such simple and cheap materials, like paper and tinsel, will help to decorate the house and give it a New Year's atmosphere.
Video on the topic
About how to make a wreath, you can see in the video below.
Hello everyone. Christmas wreath, typical house decoration for Christmas and New Year holiday. Make it from different materials. Using artificial or real fragrant fir sprigs. Decorate with toys and different means of decor.
Traditionally, it is a charm, which hung on the front door above the threshold. His feature, attract prosperity, happiness and well-being in the house. It is like a symbol of good luck, so it is hanging not only outside, but also inside the house.
A round shape bears the meaning of eternal life, her victory over death, associated with a globe. In addition to the wall and doors, a Christmas wreath with candles put on the table. Usually make with 4 candles, which tells us about four sides of the world. And they can be different in color. For example, a green candle tells us about the growth, development and fertility. And red about love, and purple, spirituality.
Every year we make snowflakes from paper with your own hands, and New Year's toys from different materials to create an additional atmosphere of comfort in the house.
The tradition came to us from America, but in each country they are decorated in different ways. In France, flowers, in Germany prefer a classic option, and in Scotland decorated with ribbons.
In the Scandinavian countries decorated with bumps and bells, and the Americans, the main colors for jewelry, is red, green and gold. They decorate it with mandarins, cinnamon sticks, cones and christmas toys, thereby creating a special atmosphere of the holiday. You can decorate your composition as your imagination will allow.
New Year's wreath on the door with their own hands from girlfriend and tinsel
Dear friends, everything starts with the foundation, and before you think about the decorations. Making the foundation, you can already issue any wreath. For the manufacture we will need simple materials.
What do you need:
- Burlap or fabric
- Twine or thread
- Glue moment or adhesive gun
- Two covers of different sizes
- Mishura and toys for decoration
Take a piece of tight cardboard, I take a cover with a pan, I apply and buck your handle. Cardboard can be used from under old boxes, or asked in the store, often throwing tight cardboard boxes.
In the center place the lid from the kettle, for example, or a smaller cover. Or you can do all this using the circula. I also buck the handle.
Cut with scissors. Try to all be smoothly and beautiful, and the lid of the small size was in the center, and not on the side.
Then I suffer the newspaper, and glue them to the base. Suitable hot glue or moment. You can try PVA. Newspapers need to be laid in a long arc. Try not much, but not enough, considering that he and so will be convex because of jewelry.
Then beautifully wrap the cloth or burlap, it can be bought in stores for creativity. You can use old things, who have something. It looks more beautiful than a wreath of burlap wreath. We are glued with an adhesive gun.
Next, cut off a piece of twine, make a loop, and attach a loop to the base, can now be suspended on the door, or even where you want. Everything, the basis itself is ready, now it's about decoration and decoration.
If you do not have burlap, you can use white sheets instead of newspapers, and then wash everything with scotch. Also as an option. Moreover, it will suit, since we still close in some samples.
Then we need to decorate the New Year's wreath on the door from the bags, that is, the rain of the divide color. We wind in a circle, and glue.
Then we wrap the beads in a circle, we glue small balls and gifts. Adhesive snowfields and bows, make a beautiful decor. You can splash on top of white paint or artificial snow. Optionally, if you have it.
It can be suspended at least at the front door, even on the wall. Moreover, both from the outside of the door, and with the inner, to create an atmosphere of the holiday.
Master class on the manufacture of a Christmas wreath of paper and cardboard
This is a very simple master class for the manufacture of the simplest New Year wreath on the door. We made it with children, and only paper, and cardboard are needed. We decorate ribbons and threads. Such a wreath can be done with children to school or kindergarten.
What do you need:
- Corrugated paper
- Threads or swords
- Scissors and pencils
- Adhesive Pistol
Prepare all the necessary materials, and we will begin the manufacture of a Christmas wreath on the door with your own hands from cardboard and paper at home.
Cut the circle from the cardboard, you can make a circle all this, or covers as in the first version. Wreathe wreath, you can try color, but corrugated more convenient. To do this, cut out long strips, and wrap in a circle. Fixing glue.
Then you need to make fir branches. Cut off the strip of corrugated or crepe paper. Approximately 20 cm, 4 cm. We make cuts of 0.5 mm, but do not be dotted to the edge as in the photo. Then twist them with your hands, these are needles Christmas trees.
And twist from, tighten tightly, and glue, fix glue, so as not to be promoted.
Here such fir branches turned out, this is done very simple. And the wreath that we wrapped the paper.
Fir twigs from paper we glue a wreath. Glue as you like if you were little twigs, make it yet. You can make it more magnificent or modest.
We glue bows from ribbons and twine. Since heavy toys can not stand at such a variant.
This is a very simple and step-by-step master class on the manufacture of a New Year's wreath on the door with photos, as you have already seen and guessed. Cretaged paper can take Chinese or Italian, I like the second one more, as it is more dense.
We glue the loop of the desired size, and close it with a spiral thread. Everything is very simple. I made such a spiral from the thread from the twine, and glued on top.
You can make different dimensions, and the color of the paper is different, that's for example, I made from dark paper.
So, with a simple option for children to school or in kindergarten figured out. For holidays are often asked to make children or with children. And now it will go from simple with difficult.
Christmas wreath on the door of cones and fir branches
You can take as green real fir branches for wreath, alive. So artificial, they do not appear, and the product can be stored until next new year.
What do you need:
- The base of foaming
- Spruce branches
- Christmas decorations
- Burlap and twine
- Artificial snow
We glue a shell from twine. The basis for the New Year wreath of foam. Such basics are often sold in stores for creativity.
Plug by its cloth, or burlap. And you can begin to decorate different kinds of decor.
Here you can already show fantasy, use big or small bumps, and christmas balls.
Decoration and gluing a bump with toys, pine or fir branches can be glued in emptiness. I repeat, artificial or real. As you like, I have artificial. We drip the glue drop, and go to the emptiness and fix it. That's how in the photo, they are filled with branches.
I am splashing it with artificial snow, the effect turns out as if it is all covered with an innese. But I clean partially from the balls and cones an old toothbrush.
You can additionally glue branches and berries to create an even more beautiful view.
Everything is ready, you can a story on the wall or door from the inner or outside, using the loop, so I advise it to fix it well.
New Year's wreath from Christmas balls at home
To build a wreath, you can use both small balls and large balls. The composition is very interesting, the assembly is not complicated. And you can hang for the hook, which facilitates the task, you do not need to invent anything.
What you need to work:
- Christmas balls of different sizes
- iron hanger
- A piece of burlap
For the manufacture we will need balls of different size and color, small gifts. Hanger for things, I need a fundamentally iron.
We stretch it in your hands, as the New Year's wreath from the balls on the door on the door is round. We try to give the shape of the circle.
From the top you need to bite off with pieces, and begin to ride the balls, rubbing the iron wire into the hole. We ride in any order, but alternating different colors and forms, for beauty.
When they reached the edge, and ripped enough toys, you can twist the free edge, fasten to the main hanger.
That's what we get, we try to twist reliably, you can use pliers to fix everything well, as if it is bad to fix it, everything can break.
Next, I tie a bow of burlap, you can make a bow from satin ribbons. And everything is ready, you can hang on the door. Let's hang for the hook.
But on this our creativity does not end, because I still want to offer you different options for the manufacture of a Christmas wreath from girlfriend.
Make a New Year's wreath on the door do it yourself from the threads step by step
I did such a decoration for my girlfriend, who loves to knit, I hope my decoration will like it very much, and she will be glad to give a gift.
What you need to work:
- Cardboard and paper
- Threads of different colors
- Christmas tree toys and decor
It will take 2 rings from the Corrugation Corrugation, the outer diameter of 32 cm, and the inner 17 cm. Plugs are the remnants of the wallpaper, we cut and glue around. Himself with a circle of plow glue to the wallpaper.
You will need two such workpieces. On one of them, we attach the rope, for hanging, and we glue two did one to the other. You can glue the moment.
With the inner and outer side of the circle we glue a decorative cord.
Now we need threads, but not to use their huge amount, take a sheet of paper, and squeeze it from it from it. Then wound the threads. There must be circles of different size. See friends to look beautiful and harmoniously, they must coincide in colors.
Making a sufficient number of tangles stick them to hot glue. We where I will glue an angel with a glitter of dark balls so that the white angel will not merge with them. Glue using a gun.
The upper part decorate a bustland bow, and in emptiness, or free space between balls of threads, glue the christmas toys, balls and snowflakes.
You can buy a ribbon consisting of snowflakes, and cut into separate items. Or decorate to your taste. Such a wreath can be made of yarn residues, it will serve as an excellent decor of the room and the door.
How to make a wreath on the door for the new year with your own hands in stages
If you want to make a decoration of fresh twigs, taking a spruce or pine, it will not be a durable wreath. Since it will turn. Therefore, it is better to use coniferous breeds that keep their shape well and chew.
This is a tees, which dries well and retains the color for a long time, various types of juniper. But a more fragrant wreath is obtained from fir branches. The needles are tightly held at the expense of resinness.
What do you need:
- Twine or wire
- Toys and decor
- Glue gun
- Coniferous branches
The basis of any wreath is a framework. What can he be from? These can be any flexible branches of shrubs and trees. Suitable vaciy grapes, long birch branches.
Twigs need to be collected, and arrange in a circle of various diameters. Fixing with wire or twine.
The twigs are placed in beams and wind by twine so that it is lush. We have one one-sided. It is very important not to use a big twine's motility, but to clear a small amount, so it will be convenient to bring the branches to the base.
Be sure to fix the branches to threads so that everything is tightly held. And then decorate toys and cones. We glue with hot glue.
You can also use to decorate cinnamon sticks, dried mandarins strips and other decorations. For example, roll balls from Cesal. He clings to the twig well.
You can splash with artificial snow or white paint, to create a snow-covered winter view.
You can decorate completely, or only the bottom of it. And on top to glue a bow of ribbons or burlap. Do not forget to form a loop from twine, for which you can hug.
Video for the manufacture of an unusual wreath from pumps
You can make a beautiful wreath on christmas from undergraduate materials, for example, using pumps. Press the button, view the video, and do.
And I want to offer another no less interesting composition that you can steal the table for the New Year and Christmas.
Making a wreath on a Christmas table with a candle
This composition on the table, makes comfort, warm, and perfectly raises the mood. It can be in the center of the table, please you and your guests. There are different options for design, but I want to offer, simple making candlestick for the new year with candles from twigs and cones.
What do you need:
- Old discs
- Spruce branches
- Bumps and acorns
- Adhesive Pistol
In order to make a wreath on a New Year's table with a candle, I prepared the necessary details. Painted with a red lacquer of the bumps, dried tangerine circles.
Then cut the fir branches with scissors or a secateur into small fragments. In the center of the disk we stick a candle, and around, glue of the twig, trying to place them in one direction.
So that it was a lush, glue twigs in 2-3 rows. And then lay out the composition, and if everything triples, start gluing. For example, I use walnuts that painted in gold, acorns, painted in red. Cryes and asterisks, carnames carved from the skin, and dried. I stick with a glue gun.
Since the candlestick on the table made of fir branches is made at home with your own hands, so do not try to observe symmetry very much, there must be a negligence that creates some comfort, and gives it a special charm.
I wanted the effect of snowing, and I took the acrylic paint, went through a semi-dry brush on nuts, acorns and cones.
If you want, you can additionally walk with a tassel along a spruce twig. Such a New Year's wreath on a table with candles will become an excellent decoration, and will create the atmosphere of comfort. It will stand on our holiday table.
To bright and diverse to decorate a house or room, you need to show your fantasy, and a little creative skill. I am sure you get a lot of pleasure from the process of making wreaths on the door with your own hands from the remedies. All step by step with a photo, it will facilitate the process and will help in creating beauty.
And creativity along with children, will additionally combine your family. Congratulations on the upcoming holidays. Creative inspiration you. Good luck to all!
New Year wreaths from ribbons
If the previous options with the winding of the base are too simple for you, decorate the wreath of ribbon figures. Here will have to make efforts, but the result is worth it.
What do you need
- glue pistol;
- narrow green ribbon;
- Narrow red ribbon;
- narrow gold ribbon;
- Green felt;
- Christmas balls;
- Red pumps;
- Wide color tape;
How to do
Using the calcination and glue, make figures from green, red and gold ribbon as shown in the video.
Cut from cardboard ring. Now with its help, make a second ring from felt. Shaft both blanks.
On the side of the base where there is no felt, make a loop from the golden ribbon and glue the Christmas tree balls. Close the place of their fastening fetter.
To the same side, glue the billet from the tapes and pumps, as shown in the video. From a wide ribbon, we are wasting a bow and secure in the middle a small piece of gold ribbons. Place a bow above the balls.
But another interesting version of the wreath of ribbons. For the foundation, a circle is taken, carved from a disposable plate. But you can use the cardboard ring, as in the previous method.
New Year's wreaths from tinsel
The easiest and fastest way to make a Christmas decoration.
What do you need
- The volumetric base of foam or cardboard (on how to make it with your own hands, read below);
- Pencil - optional;
- Wide Mishur;
- stationery pins or scotch;
- fabric is optional;
- Adhesive pistol, fishing line or thread - optional;
- Any New Year's decorations - optional.
How to do
If you do not have a suitable base, cut the ring from dense cardboard. If you want to make your blank volume, stick to it paper or film.
Mock tinsel from above and secure it with pins or scotch. If you are afraid that the basis will be visible, it is necessary to encourage it suitable for color to the cloth.
With the help of glue, fishing lines or threads, you can decorate a wreath with chicken toys, cones, ribbons or other elements of the decor.
By the way, a thin hanger can serve as the basis. Here is the detailed process of creating such a wreath:
Christmas wreaths from Christmas balls
Such a wreath is also done quite quickly. We only need to stock the mountain balls.
What do you need
- Thin hanger;
- Christmas balls;
- Ribbon of suitable color.
How to do
As in the previous method with a tinsel, a hanger must be bent, forming a ring. Then the upper part of the wire should be broken.
Put on the hanger there are a lot of Christmas balls and secure the wire from above. On the hook, tie a big bow from the ribbon.
You can diversify the wreath by adding artificial coniferous branches to it with decorations. To do this, from two sides of the hook, leave a little space without filling it with the balls. Then glue the branches there, and already on them - a bow.
The balls can also be fixed on a volumetric basis for a wreath with a glue gun:
New Year wreaths from fabric or thread
The original wreath can be done, simply by wrapped the basis of any cloth or thread and adding festive decorations.
What do you need
- Volume base or cardboard;
- fabric, burlap, beep or yarn;
- glue pistol;
- Stationery pins or scotch - optional;
- Any New Year's decorations.
How to do
Such wreaths can be made from both volumetric and flat cardboard bases.
If you use tissue or burlap, cut them with wide stripes. Wake up the basis, securing the selected material with glue, pins or scotch.
Then take any decorations to the wreath. It can be Christmas-tree toys, artificial coniferous branches, Christmas decor and much more. Here are some ideas for inspiration:
New Year wreaths from pomponov or trank yarn
Pompona can be bought or make it yourself. We will tell how to make a wreath of homemade pumps.
What do you need
- device for the manufacture of pumps or plug;
- glue pistol;
- Volume base or cardboard;
- New Year's decorations - optional.
How to do
From yarn - better multicolored - Make a lot of pumps. If they are different sizes, the wreath is more interesting.
In the video above the pumps are made using a special device. But you can use other ways.
A similar device is easy to make cardboard:
With a fork, you can make small pumps:
No less beautiful will turn out without any devices, if you just wind yarn on your fingers:
Control the edges of pumps with scissors. So they will be more neat and fluffy. Stick them to a volumetric basis or a cardboard ring. If desired, you can decorate a wreath with decorative objects.
This is how such wreaths from pomponov look unusual:
In the same way, small yarn glasses can be glued. Similar decorations look no less original:
Christmas wreaths from cones
For lovers to make masterpieces from natural materials.
What do you need
- Yves rods or volume base;
- The secateur is optional;
- glue pistol;
- Christmas balls;
- dried tangerine peel;
- fruit bones;
- Orange paint;
- White paint;
- Artificial snow-spray.
How to do
Twist the rod into the ring, as shown in the video. Cut away the unnecessary secateur. As a basis, it is possible to use a volumetric blank - ready or made with your own hands as shown in the first method.
Make a loop from the bemp on top and secure glue.
Stick to a wreath of cones, balls, peel, shell and bones. With the help of a sponge, toned wreath of orange and white paint. Sprinkle it with artificial snow.
Here are more examples of decoration of wreaths from cones:
The volumetric basis can be made on a video about a wreath of tinsel or take advantage of tips from this master class:
Wreath with a foundation of a flat cardboard will also work very beautiful:
Create a festive atmosphere 🎅
New Year wreaths from branches
For such wreaths, you can use both alive fir branches and artificial.
What do you need
- Yves rods or volume base;
- fir branches;
- Adhesive gun - optional;
- New Year's decorations - optional.
How to do
If you choose a rod as a basis, twist them into the ring and wrap the wire.
Cut into a few small firing branches by the secret. Attach them to the base with wire. If you wish, make it out of the last loop (it is not necessary, since the wreath can simply hang as a base).
Watch the threads of the branch so that they are not sticking out. You can stick to the wreath or fasten the wire decoration.
Wreaths from branches, especially natural, look very beautiful and exquisitely:
Christmas wreaths from paper
Beautiful decor elements from ordinary color and corrugated paper, as well as from unnecessary newspapers.
Wreaths from ordinary paper
What do you need
- White paper;
- Green bilateral paper of different shades;
- Red ribbon;
- Red double-sided paper;
- dense film;
- flat beads;
- Beads with a hole.
How to do
Cut the ring from the cardboard, and then - by the resulting template - the same of the white paper.
Slit two green leaf and circle a cardboard ring with a pencil. Draw a larger diameter circle, and in the middle - smaller. Cut the workpiece according to the latest outlined lines.
Lubricate the cardboard ring with glue and glue to the green paper blank. Make cuts on paper and glue the resulting rectangles to the ring. From the same side, post a loop from the tape. Lubricate the ring with glue and cover the white paper billet.
Fold across in half a few sheets of green and red paper and cut down the fold line. Then turn them with a narrow harmonica, as shown in the video. Cut each harmonic to small pieces. Revealing them and alternating colors, place the blanks on the basis in a circle.
On the film glue, mark a small circle and place the beads along the contour and in the middle. Cut this circle and enter it a little thread, in the process putting on it beads. Enclose flat beads on the other side of the workpiece.
Tie the resulting toy to a wreath. Instead, you can take a ready-made Christmas ball or other suitable decoration. Make a bow and tie it to the top of the wreath.
Taking a disposable plate as the basis and gluing the colored paper strips, you can easily and quickly make a new year decoration:
From twisted paper strips, it will be such a cute wreath:
Wreaths from newspapers
What do you need
- Knitting needles;
- Green paint;
- red paint;
- Red ribbon.
How to do
With the help of the needle, twist two sheets of newspaper in the tube, the tip fasten with glue. Turn the tube into the ring, gluing the edge.
A few more newspaper sheets in wide stripes and glue them along in half separately. Wrap them around the ring by making a thick base for wreath.
With the help of the spokes, make a lot of tubes of different lengths from pieces of newspapers. Twist each of them and squeeze the middle. In the video, this process is shown in detail.
Stick the resulting billets to the base. Color them into green and red. Make a bow from the tape and stick it to the top of the wreath.
But the variant of a completely different wreath of the same newspaper tubes:
Corrugated paper wreaths
What do you need
- Green corrugated paper;
- Pencil with an eraser at the end;
- Red pumps;
- Red ribbon.
How to do
Make a wide cardboard ring. Cut the paper into small squares. Using the reverse side of the pencil, bend each of them and glue to the base.
Secure pompoms or other decorations on a wreath. Make a loop from the tape, selling it into the ring.
The original and simple wreath can be done, just wrapped the corrugated paper around the base, tolding the bow and attaching the New Year decorations:
From corrugated paper, there will be beautiful flowers of Poinsettia, which must be glued to a flat base:
Think up New Year's Eve 🎇
New Year wreaths from plastic bottles
Instead of throwing out unnecessary plastic containers, turn it into an original decoration.
What do you need
- Stationery knife;
- plastic bottles;
- aerosol red paint;
- Christmas beads;
- decorative bells;
- Adhesive gun - optional.
How to do
Cut from bottles of bottoms. Make vertical cuts on them along the Vpadin lines. Bend corners of each cut part inside. For reliability, clamp the folds of the folds of the pliers.
In the middle of each workpiece, drill the drill hole. Color plastic red paint on both sides. Take two blanks and connect them into the cloves inside, as shown in the video. Skip the rope through them.
Put on it the rest of the workpiece, alternating them in the same order.
At the end, tight the rope, forming a wreath out of blanks. Put the beads on it and attach the bells from above. They can be suspended on beads or glued.
Wreath can be decorated with cones, chicken balls and other Christmas toys, paint into green or any other color.
From bottles you can make large flowers, paint them and sprinkle with a glitter. In this video, it is shown in detail how to make a beautiful wreath of flowers:
And you can still make a wreath of plastic "leaves":
Create festive decorations with your own hands and adults and children. Make the original New Year's wreath at home is much more pleasant than buy a pattern of product in the store. The 70 master classes of different levels of complexity are disassembled below. Each of them will allow not only to decorate the apartment to the new year, but also to raise the mood and relatives.
Where did the tradition come from?
In the post-Soviet space, the wreaths in the New Year's interior appeared relatively recently. There are several different stories of the origin of this tradition. The most reliable version is reading: it appeared in 1839. Thus, Johann Heinrich Vikhrn (the theologist of the Lutheran Church) decided to help illiterate children, count the time before the holiday.
He took the old wheel, decorated his cheese and put on the table. In the obtained billet, Johann posted 23 candles. 19 red - denoted weekdays, and 4 high white - Sundays.
Each morning set fire to a new candle, thereby counting the next day of the post. So the children easier tolerated restrictions, and a holiday was waiting with great enthusiasm.
Over time, only four "Sunday" candles remained in the wreath, and then they became an optional decoration. The faith symbol turned into an original decor element, swinging from the table to all available surfaces.
Now a festive wreath can be bought on the Internet or a regular store, or make it yourself.
Making the decoration at home is much more interesting than getting the finished accessory.
So the wreath is obtained by an individual, impregnated atmosphere of spiritual heat and a family coziness. The creation of a small miracle can attract children, turning the process to the original joint entertainment.
How to make the basis (frame)?
Before embodying the idea of decoration, you need to make a durable wreath frame. It can be done in several ways. The main thing is to respected several conditions. The billet should:
- hold form (do not disintegrate, do not soary with time, etc.);
- withstand weight (own and the whole decor). This is especially important if the craft is suspended, and not laid on the table;
- well tolerate the selected type of glue (Do not twist from the wet pva or not melt from the thermal system).
Read also: 50 delicious and beautiful ideas for the New Year's table
It is also necessary to take into account the amount of time and finance, which will be spent on the manufacture of a New Year's wreath. If a new decoration is made for each holiday - the materials can be bought by budget (especially if it is a handicrafts in kindergarten or school).
Those who make the decoration "on the century", it is better to stay on a stronger and durable basis.
Below are some of the most popular and simple options for a frame with step-by-step MK.
From the vine
The base from the vine is one of the simplest and budget options. It is enough to find some smooth and flexible rods without bitch.
It is best for these purposes, IVA, grapes and similar to the properties of bushes and trees are suitable.
- Before starting work, it is advisable to boil the vine within 1-2 hours, and clean it from the bark. So the blanks will look more aesthetically, plus when boiling accurately die bugs and insects that winter on the plant. But in this case, the wands need to be allowed to dry well before starting the framework of the frame to be subsequently not led;
- Next, the branch is folded into the circumference of the desired diameter. The remaining part of the vine turns around several times around the first turn. The end hides between two revolutions and is fixed, if necessary;
- The beginning of the next twist is also clamped between two revolutions. And the vine itself is winding around the workpiece, like fiber fibers. The process of "winding" must be continued until the framework of the frame will reach the desired dimensions;
- Do not worry if the joints of the branches are not too neat. The main thing is to keep the frame tightly. All visual shortcomings will hide the decor;
- If the rods are too thin and brittle, they can be additionally copied with wire or ribbons.
If an old hanger was lying around in the house, she can give a second life. A plus of such a solution will be a finished hook for hanging on the wall or the front door.
You can make a frame from the hanger in two ways.
- Just bend the workpiece by giving it the desired shape. For this, a thin soft metal hanger is suitable (such usually give in dry cleaning).
The advantages of this method include small time and finance costs. The main disadvantage - the framework turns out too thin.
This problem is solved by a bulk decor, or the desired centimeters "in the waist" will have to be increasing (old newspapers, etc.).
- The easiest way to create "volume" from insulation for pipes. The desired cut simply turns around around the aluminum frame and is fixed with scotch.
For a large diameter frame, it is better to draw five plastic hangers among themselves, as shown in the photo below. For more reliable fixation, the shoulders need to be additionally tied or fixed with scotch.
Depending on the size of the hangers, the diameter of such a workpiece will be 50-80 cm.
The advantage of this solution is freedom of choice of form.
The easiest option is the ring.
But if necessary, you can make a New Year's wreath, for example, in the shape of a heart. In this case, it can be used on the day of lovers, just replace the decorations on the frame.
It is better to think about the location of the decor in advance, then the coils of the wire will be located in the right places. And to decorate the craft will be easier.
Give this basis the New Year's view is very simple. It is enough to wrap it with New Year's Mishurya desired color.
Additional jumpers for small jewelry can be made of a core wire of the desired shade.
From insulation for pipes
This is perhaps the easiest option. Insulation you just need to buy in any construction store and roll into the ring. The price of such a basis will be minimal (about 50 rubles). The difficulties arise in order to connect the pipe for the frame - but it is not necessary to knit it. The ends are simply glued with a thermopystole. The whole process takes no more than two minutes.
If the decor is massive, then inward the pipe can be additionally inserted and twisted its ends before gluing the ends.
In fact, it is the same frame of the wire, but the volume is given to the chopped cardboard sleeves. They are riveted on metal, so that there are peculiar "beads" from cardboard.
It is worth noting that This solution has a lot of flaws:
- cut paper blanks is not so easy , as it seems at first glance. Cardboard is crushed, stratified, and the rings are pretty uneven;
- "Beads" constantly move , not wanting to occupy the place allocated to them. To save the position, they will have to additionally fix the scotch or gluing paper (wallpaper or newspaper is suitable);
- free edges of the wire are inconvenient to twist , After the sleeves' rolling. Either it will have to have "beads" not so tight as I would like.
This option is usually choosing those wizards who need a specific base size. Towels, foils, toilet paper and parchment use sleeves of different diameters. Which allows you to choose the optimal option.
In stores you can find ready-made bases from foam. The cost of such a carcass is only 100-200 rubles. (depending on the diameter). Such a workpiece will allow you to make a New Year's wreath on the door very quickly, just to decorate the foam.
Analogue of shopping blanks can be made independently. Foams are sold in a construction store, the remnants of the packaging from the overall equipment are suitable.
The outline of the future frame is applied to the foam and is neatly cut with a stationery knife.
In the process, you need to ensure that the foam not began to crumble.
Old box can also become a wonderful basis for a wreath. It is enough to cut from the cardboard the ring of the desired diameter and width.
If the wreath is hanging on the wall or door, it is necessary to glue the loop from the tape or braid.
To create a bulk frame, the cardboard is placed by cotton, or foam rubber.
Such a workpiece must be additionally placed with a layer of paper or wrapped with assembly tape. So it will be smaller and stronger.
If there are no such fillers at hand, it is possible to use conventional paper to create volume. It is crushed to the desired volume and is tied with a rope, or a tape for a cardboard base.
Plywood blanks, like the bases of foam sold in the finished form.
But if necessary, such a frame can be chopped independently from the old buffet. To do this, you will need a jigsaw and an electric drill.
What can be done in a wreath?
After making the foundation, you can start decorating, that is, creating the wreath itself. You can make it almost from anything. The main thing is to pick up the design of the color and style of the room and the rest of the jewelry.
It is also worth considering the durability of the decor. It will be unpleasant if in a couple of days the living flowers in a wreath are called, and the needle calens or yellow.
An important point when choosing a decor is security. This is especially true, if there are small children or pets in the house.
In this case, when decorated, it is better not to use what can crash, light up, or perfeit the small inhabitants of the apartment.
There are no more restrictions, you can safely include your own fantasy, and start creating beauty!
Below is a selection of master classes of different levels of complexity. From simple variants of crafts that can be made with children - to complex copyrights with a step-by-step process description.
Not necessarily to completely copy other people's ideas. It is much more original to create something your own, exclusive. Let even it be done, not expensive, but from the subwoofers.
Using the presented billets, like patterns and patterns for the embodiment of their own ideas, you can create real New Year's masterpieces.
From the cones
The decoration made of needles and cones is the classic version of the New Year Wreath. Therefore, there are a lot of design options in such an ecosyl. After all, this decor can be found literally under his feet.
Do not despair, if in the nearest parks and landings coniferous species of trees do not grow. Corses can be made with your own hands from felt.
To do this, you will need a minimum of materials:
- felt of two colors;
- Shilo or thick needle;
- Spaking or toothpick.
Additionally, you can use the glytter or paint in cylinders for decoration.
Detailed step-by-step instructions with photos are shown in the table below.
It is clear that such a bump cannot be considered an environmental material, but in some cases it is the only option.
When making a wreath exclusively from cones, it is better to use a thin frame of wire or hanger. Since the bumps themselves are quite bulky decor. If you add a massive framework, the finished decoration will look too cumbersome.
If such a concise design is not stirred, it can be supplemented with other decorations.
From cones and balls
Do not necessarily cover the bumps on the whole base. You can use them only as an auxiliary decor. Below is a step-by-step instruction for the manufacture of a New Year's wreath in the style of Provence.
This design option cannot be attributed to budget, but it looks gorgeous.
For the decor you will need:
- bulk base (from sleeves, foam, etc.);
- spruce cones (better paint acrylic paint);
- Christmas balls;
- thin wire;
- glue pistol;
- artificial flowers;
- sisalous canvas;
If you wish, you can add your decor elements, or exclude those that are not suitable from the list.
|Complete the basis of a sisal. Secure it with a thin wire. |
The fibers of this material are very voluminous, so the thin copper lived easily behind them and will not be visible.
|With a convex part of all Christmas balls to shoot metal fasteners. On the protruding area of plastic winding a thin wire and tie the ends on the knot. With it, the balls will be attached to the base.|
|Decorate balls with ribbons (tie "nest"). They are attached with the help of a glue gun.|
|Tapes are fixed in such a way that two free end remains at the bottom of the ball. Of these, the bow will later be formed.|
|Similarly, all the balls are decorated.|
|Wire mounting balls is tied around the frame. For dense tigers it is better to use pliers. Unnecessary wire edges are cut off.|
|In the same way, the bumps are attached to the base (the wire is passed between the scales, as in the first MK).|
|The gaps between the cones are additionally decorated with artificial flowers of lavender (this is the same New Year's Provence).|
|If the balls, cones and twigs of the lavender are not enough, you can add other flowers in the same shades.|
|Separate buds are attached with the help of a glue gun.|
|The decoration of this part of the wreath is completed. This can be finished, but better to add a bow in the opposite part for symmetry.|
|The bunch for a bow is cut from the sisalous linen of the lavender color.|
|Longitudinal parts are decorated with silver ribbons. They are easily glued to the canvas with a pistol.|
|The resulting billet is cut into three parts: one long and two short.|
|The edges of the long bend to the center - it will be a bow. Short parts - its racing edges.|
|All parts are bonded with a glue gun. With its help, the necessary folds are combined.|
|Similarly, a small tape bow is made. They decorate the middle of the first.|
|The same ribbon, the finished bow is tied to a wreath, opposite the decor from the balls and cones.|
|When fixing, the tape is skipped through the "wings" of the bow. So it will be unnoticed.|
|Too long ends are neatly trimmed.|
|Additionally, the bow can be decorated with flowers and branches of lavender.|
Read more Step-by-step instructions are shown in the video:
From cones and traffic jams
This master class will require:
- Flat and wide base of cardboard or plywood;
- sisal for coating frame;
- Thin wire or fishing line;
- glue pistol;
- traffic jams;
- Additional decor as desired.
Prepare all the components, you can start decorating.
The finished wreath is not suitable for the table. It looks better in a suspended condition (on the wall, fireplace or door).
From cones and walnuts
For this wreath, a bulk basis will also need. If the decor is not too tight, it is better to decorate it (canvas or burlap).
A ring with cloves is cut out of it (as in the photo below) and attached to the basis of the adhesive gun. The junction will subsequently hide behind the decor.
Process for decorating the workpiece:
|Decorations are attached to the same pistol.|
|Corses, nuts and branches, designed for decorating, better paint white acrylic paint in advance.|
|You can use not only whole nuts, but also shell. So even more convenient.|
|The frame is uniformly covered with decor. In addition to walnuts, cones and balls, you can use, leaves, shell pistachios, dry inflorescences, etc.|
|Through the decorations are glued branches.|
|If a wreath of the frame from all sides is reapped, then it can be hung on the ceiling or in the doorway.|
|At the request, the product is decorated with white paint smears.|
|Climbing a wreath of a thin misher, you can add it glitter and shine.|
The finished wreath looks very stylish and beautiful.
From cones and lavender sprigs
Decor of cones and walnuts can be changed a little. Having obtained a very gentle wreath of cones and lavender.
As in the previous MK, the frame is punched with walnuts, cones and shells painted in white. Bulk branches and golden balls should be eliminated from the decorations - tenderness rules in a lavender wreath.
Next, it is necessary to add artificial berries and branches of lavender. But to preserve harmony it is desirable to choose only three colors: white, muted green and lilac.
The entire additional decor is evenly distributed on the basis.
The final stroke becomes neat white bows.
The finished option looks very sophisticated and original. Snow-covered bumps in combination with fragile branches of lavender create an atmosphere of covered with inheree alpine meadows.
From tinsel (rain)
A decorative wreath of Green Mishura belongs to the category of crafts "on the ambulance hand." You can make the finished composition literally for half an hour, it looks pretty pretty.
The table below shows step-by-step photos for beginners:
Depending on the selected decor, the finished exercise may be both budgetary and quite expensive. Therefore, it is desirable to decide in advance with the design and estimated costs.
It is not necessary to dwell on green. A wreath of silver or Golden Mishura will look no less festive and smart.
From the real tree
Live New Year wreaths is a classic. With their design, not only spruce and pine are used, but also more exotic coniferous plants.
Decorations of Tui or from juniper look original, they better endure the absence of moisture. Not so deform, do not turn yellow and do not cry like a Christmas tree.
And these items are very important in the manufacture of decor from natural materials.
Natural branches are quite heavy, plus they often have the wrong shape. Therefore, working with them is not as convenient, as with perfect artificial substitutes. But the smell of real conifers is all difficulties.
When creating a frame for such a decor, several points should be taken into account:
- It is more convenient to work with a bulk and massive basis;
- Fasten the branches to a thin wire is uncomfortable. It is better to make a wire frame to be wider (several turns), or add it to the vine;
- Cardboard for the frame should be very dense. Thin or corrugated (packaging) is not suitable for these purposes, it will not stand the load. You can still put this wreath on the table with candles, but you will not be able to hang on the fireplace or wall.
In addition to the frame and coniferous branches, you will need:
- thin wire;
- bilateral scotch or thermopystole;
Materials for decorations are selected individually. But still it is worth remembering that the wreath is New Year. Too unexpected decor (for example, in the marine style: with shells and fish) - it will be inappropriate. It is better to choose something more familiar: cones, ribbons, bows, small christmas toys.
By adding cinnamon sticks or anise sticks to decorations, you can dilute the aroma of needles by other spicy notes. Either strengthen the New Year's mood by choosing a decor with cotton and oranges or tangerines.
The palette is also practically no restrictions. One like the motley and bright decorations, and the other are monochrome. But with an independent decoration of a wreath, you should not forget about the green color of the needles, the blue-silver tones and red-gold are well combined with it. If everything is mixed at once - it turns out too bright and throw.
See also: How to make a panel on the wall for the New Year with your own hands: 30 master classes with photos and videos
Previously, it is advisable to distribute the branch based on the branch and the estimated decor. Perhaps large spruce paws will have to cut the secret to smaller, or something to remove something or vice versa.
After selecting the base and jewelry, you can move to creating a wreath. Step-by-step photographs of the process are shown in the table below.
From artificial christmas tree
In the manufacture of wreath from artificial ate there is Several advantages:
- It can be used for several years in a row, if you wish, changing the decor;
- All twigs are perfectly smooth and correct, do not have to invent, how to position them to fill all the lumens;
- It is not as strong as natural needles;
- It is easier, so it is not so demanding to the base.
The disadvantages of such a product are two: higher cost and absence of natural fragrance (and when using low-quality materials, an unpleasant synthetic smell may be present.
This option is ideal for those who had an old banging artificial Christmas tree. It can be disassembled into separate twigs and give them a new life.
Then everything is very simple and fast:
- Prepare the basis. In this case, not even very durable materials are suitable. If, for example, cardboard is too thin - you can take two sheets and tie them together.
- If the wreath is hanging, when binding, you can immediately make the loop of the desired length.
- If the branches are too long can be cut.
- Artificial needles are very soft. It can be implanted.
- Depending on the base material, the branches can be mounted as a thermopystole, tape or wire. The main thing is that with the front side it is not visible fasteners.
- Since the ends of the base are also wrapped with a cheese, the appearance of "side" is quite aesthetic.
- It remains only to decorate the workpiece with the selected decor, as shown in the previous MK.
Paper wreath is another option of the original craft in the garden. It will take:
- Several sheets of colored paper, combined with shades;
- Stationery knife and scissors;
- Decorative berry balls (can be made independently from the wool);
- circus or two plates of different diameters;
- Heting for hanging (if necessary);
Paper wreath of ostolist ready. If desired, it can be additionally sprinkled with artificial snow from the spray.
Felt wreaths are very cozy, soft and bright. This is a real embodiment of a fairy tale and New Year's magic. But their creation is a rather painstaking and time-consuming job. You need to make a lot of strength so that the product looks neatly and beautiful.
For those who are not afraid of handmade, the following is a set of materials necessary for the manufacture of the composition.
Naturally, the colors of felt, thread and beads, if desired, can be changed.
You will also need a wide cardboard framework, any filler (synthetone, holofiber, fleece, phlizelin, etc.) and patterns of future jewelry.
If desired, the entire decor can be made from felt by making it volume (fill as well as the basis).
From the balls
Such a wreath will be volumetric. It is better to take a wide foundation, otherwise the balls will interfere with each other.
To work, you will need:
- Wide base of foam or cardboard;
- glue pistol;
- paint in the cylinder for the frame (if the wreath is silver-white, the basis of the foam can not be painted);
- Balls, ribbons, christmas toys.
The entire manufacturing process will take no more than half an hour.
No matter how tightly there are balls, the framework will still be peaked in the intervals. Therefore, it needs to be painted in a suitable shade.
After drying, the inner perimeter is glued with small diameter balls. You can pick up toys of different sizes. The main thing is that they blocked the end well.
For the outside wreath, larger Christmas balls are selected.
Further toys closes the entire frame.
If large lumens remained, the second layer of the balls is glued over the first layer.
It is not necessary to stop on the balls. You can combine toys of different shapes and textures.
The finished product can be tied with a tape for hanging and decorate a beautiful bow.
If there are glass, not plastic balls during the manufacture, then the wall decoration can be turned into a candlestick wreath for the festive table.
You can add tinsel, bumps or Christmas branches to the finished wreath.
If there are small children in the house, they will appreciate the New Year's wreath of candy. Such an ornament can be an original gift for friends and loved ones.
For the manufacture of sweet beauty You will need only three components:
- bent into the ring aluminum hanger;
- Favorite candies (more);
- Reply tapes of appropriate shades.
You need to start work from the hook. It is attached to him in one end of the candy.
After a few ribbon revolutions, the second is added.
The process continues until the hanger does not completely hide under the dense layer of candy.
The finished product is decorated with a bow at the top.
This type of decor has one significant disadvantage - by the end of the holidays wreath of candies will turn into a wreath of candy.
Products from Foamiran are very bright and festive. At the same time, it is very simple to work with the material, even a child will cope with such a wreath.
The list of materials necessary for the manufacture includes:
- clay foamiran three colors;
- tight cardboard sheet for base;
- Felt for finishing the back side;
- Beautiful bow and two small Christmas balls;
- Decorative tape for finishing the ends.
Also need a circulation, pencil, ruler, scissors and thermopystole
The finished wreath looks very bright and festive.
From threads, yarn
Beautiful white wreath of thick yarn looks very unusual and stylish. The special charm of the decoration is that even a novice master will be able to make it.
Such a wreath should be volumetric. If there is a flat frame, it needs to add volume with old newspapers or insulation for pipes.
The basis should be smooth, so the version of the frame from the vine in this case is not suitable.
Part of the toys will not be treated, therefore, the foundation must be additionally reeling with a silver cloth.
It is fixed by a thermopystole.
Christmas toys are glued by the same pistol.
One-third carcass is covered with christmas balls. The gaps between the toys are filled with an artificial Christmas tree with branches.
This wreath will not be knitted in the literal sense of the word, it is rather realistic imitation. To do this, you will need very thick yarn and a little patience.
The threads are connected to the beams of three pieces with glue.
Of these, ordinary pigtails are wearing. The length of the finished braids must be one turn around the base.
They cover all the parts free of toys, alternating with strains, as shown in the photo below.
Spit and threads are fixed using a glue gun, and the surplus is neatly trimmed.
In order to look neatly with the back of the cuts, they overlap the strip of the same yarn.
This execution is obtained on the one hand dark, and on the other - white wreath. In order for the product to do not look so contrast, toys should be diluted with white and silver decorative sprigs of needles.
Silver tape for hanging from the front side is hidden between pigtails, leaving only a loop from above.
For a bow, you will need several ribbons from organza in the same color scheme.
From each of the ribbons, a separate bow with long ends is tied.
Then they assemble into a single design and are attached to the base.
This kind of wreath is suitable for home only. It should not hang on the entrance door from the street side. Light yarn will quickly become dirty and untidy.
Details This master class is shown in the video:
An amateur hook and spokes can also surprise their guests with an original decoration.
For the manufacture of such a masterpiece will need:
- Motor knitted yarn of the selected shade;
- Hook number 8;
- Needle with a big ear;
- harness for thermal insulation with a diameter of 40 mm (for the base);
Work on the creation of a wreath with a crochet of knitted yarns begins with a chain in 15 air loops (the first is not considered).
Turn over the resulting pigtail on the back side and penetrate the columns without a Nakid (ISP), starting with the second loop.
Further canvas knit turning rows. The first loop is air. Then the canvas turns over, and then the row fit for the rear wall of the loop.
Similarly, it is necessary to train forty rows. Such a canvase is enough for a wreath with a diameter of about 30 cm. If you need an illustration of another diameter, the number of rows can be increased or decreased, the main thing is that it remains even. With an odd number of rows, the drawing on the finished wreath will be asymmetrical.
Short side of the canvas are stitched by connecting columns into each loop.
The result of such a work will be the compound shown in the photo below. It is not necessary to cut a working thread, it will be needed to connect the long side after stuffing the ring.
After that, the billet turns on the front side.
Cuting it to longitudinally in half, you can get a beautiful smooth ring.
Separately, you need to tie a chain of air loops with a length of about 30 pieces, with two "tails" on the edges. It will later be subsequently suspended with a ready wreath.
To create a volume knitted blank is filled with a harness for thermal insulation. It can be replaced with any padded material, but it is more difficult to work with a synthetone or cotton than with a harness.
Frame ends are connected by superclaim. The resulting ring is placed inside the knitted blank.
The previously connected chain is attached to the base. For this, the hook is made from the inside through the protruding edge.
Both "tail" are hidden in the middle so that only the loop from the chain remains outside.
The ends sang for hanging are tied in around the frame for two nodes.
The working thread is inserted into the needle with a big ear so that the "tail" turned out to be longer than the thread itself. It will be hidden in the process inside the workpiece.
The work begins with the loop remaining after the connection of the short sides.
The parties are connected by stretching the working thread through each loop. "Tails" are hiding inside.
The finished wreath can be decorated with any suitable decor. To do this, you will need not a lot of fantasy and adhesive gun.
Here is specially represented by one of the simplest schemes of the New Year's wreath with a crochet with a detailed description. Even a beginner master will cope with such a task.
To create a New Year's wreath in Macrame technique would need:
- Flat and durable frame (from plastic or dense cardboard);
- Knitted yarn or cotton cord of two contrasting shades;
- Plastic needle with a big ear;
The process of weaving takes place in two stages.
First, the framework is firmly wounded by the first thread.
You need to wink the yarn so that there are no clearance.
Ends with a needle hide under previous turns. So that they keep well, they can be fastened with a glue pistol.
Next, the workpiece is covered with square nodes of the thread of contrasting color.
For a ring with a diameter of 25 cm, about 20 meters of white yarn will leave. It is uncomfortable to work as long thread. It is better to divide it into pieces of smaller size, and in the process, hide the ends under the coil and start working from a new segment.
When the billet is completely linked with square nodes, the ends of the working thread are hiding inside, under the bottom layer of yarn.
New Year's wreath is ready, you can proceed to decorating.
Square node weaving nuances are considered in video:
From newspaper tubes
Paper vines can be made independently of old newspapers and magazines, or buy in the finished form.
To make a New Year's wreath of newspaper tubes with spiral weaving, you will need:
- Paper vine;
- Round frame for winding (bucket, pan, etc.);
- acrylic paint white (for "snow");
- acrylic lacquer;
- brush and sponge;
|This kind of wreath is done without auxiliary frame. The basis is the "skeleton" from the pipes themselves. For this, the vine is wound on a round box from the cake (or any other object of a suitable shape and diameter).|
|The edges of the individual tubes are bonded with a plow glue.|
|After reaching the desired volume, the plastic frame is cleaned, and paper blanks are fixed with clothespins, as shown in the photo.|
|The next weaving goes at an angle. New tubes on each turn go round a round frame.|
|Vine is wounded by a square. So that every new round is a bit shifted relative to the previous one. |
So that the turns occupy the right positions, they are fixed by clothespins.
|New tubes are glued to the previous one in the joint.|
|When the winding covered the entire ring, the second layer begins.|
|He should look like shown in the photo.|
|Over the second layer goes the third. Wreath gradually thickens, acquiring a finished look.|
|The finished base is dense and multilayer. The wreath of paper tubes is obtained quite volumetric.|
|The resulting billet is painted in white color acrylic paint. It is applied by the usual kitchen sponge.|
|After drying the paint, the billet is covered with acrylic varnish.|
|Wreath of paper vine is ready, you can start decorating.|
|Decorations are mounted with a glue gun.|
Such a wreath looks very elegant and festively. It is light, light and openwork.
Master class for the manufacture of this decoration is shown in the video:
If the weaving was not set, and the bright tubes from magazines are ready, you can proceed easier. It is enough to ride the blanks on the frame of the wire or tie them, winding every detail.
The original foundation can be decorated with Mishur, ribbons or beads.
From the plugs from wine (or from champagne)
It is necessary to make a reservation that plastic corks are not suitable for these purposes. Wreath from such an artificial material will look ridiculous.
Natural traffic jams will need a lot. The exact amount will depend on the size of the craft, but even a small wreath will take at least hundreds.
Get such a number of "parts" alone is quite difficult. Therefore, it is easier to buy traffic jams in bulk (price for 1 pc. 10-15 rubles will be released).
Decorating the wreath better than the least glamorous materials.
No organza and satin tapes - bows and tapes knit from the twine or jute twine. New Year's mood will add a couple of small toys, and the rest of the decor - bumps, nuts, cinnamon, cotton and similar natural materials.
In addition to wine plugs and decor, you will need:
- A wide base of cardboard (if it is thin, glue into several layers);
- knife and scissors;
- sisal (natural color);
- Thin wire or durable threads for fastening sisal.
|Cardboard base to reorganize a sisal. It can be mounted and an adhesive gun, but it is more convenient to simply climb into threads or thin wire.|
|In the process, you need to ensure that Sizal is tightly closed the ends and both sides of the frame.|
|The first row of plugs is glued in the workpiece, as shown in the photo. It is better to take the plugs of the same size and type. In this part, you can send the most unsightly specimens - as it will almost completely hide under the following layers and decor.|
|At the same stage, the hinge is mounted for hanging. It is just tightly tied to the base.|
|On the inner and outer edge, you can put more volumetric tubes from champagne. In this case, one layer of covers will be enough.|
|The very first series of plugs is closed by the second layer. Now the plugs should be located in chaotic order. The gaps are filled with decor from cones and cinnamon.|
So that the wreath looked more festively and brightly - the cones can be "messing" or painted in a gold color. For contrast, you can add a few small red berries balls.
Such a wreath wonderfully complement the New Year's interior in the Loft style. Natural materials and shades will not be knocked out of the overall entourage, adding festive notes.
Jute fabric is actually the same burlap, simple and rather rude. Playing in contrast and adding a delicate silver decor to a similar basis, you can get a very original Christmas decoration.
For the manufacture you will need:
- Jute tape;
- bulk base (you can take ready-made polyfoam or make yourself from insulation for pipes);
- glue pistol;
- Beautiful tape for hanging;
|If it was not possible to find in the frame of the frame of the frame of the frame from the foam, it can be made from a pipe or insulation.|
|The finished wreath will be very easy, so the joint can be simply copped with a wide scotch.|
|The resulting workpiece is wrapped with a jute ribbon.|
|Ribbon ends fix thermopystole.|
|The framework does not break anywhere - the basis for a wreath is ready.|
|For the decor you can cut off some small twigs from the old artificial Christmas tree.|
|Fix them with a thermopystole.|
|So that the wreath looks at the New Year festive, add decorations in silver-white tones. Some bumps and christmas branches can also be "messing".|
|Tape for hanging should be light, but wide. In the same bright colors.|
|The finished wreath looks very gently and neatly.|
If the wreath is scheduled to put on the table, and not hang, you can tie a beautiful bow from the tape. But it is better in front of the main decor in this case.
The scheme showing how to make a bow on the New Year Wreath below:
From hangers and balls
One of the fastest and simple options is a wreath of Christmas balls.
For the manufacture you will need:
- Thin aluminum hanger;
- set of balls of different sizes (about 80 pcs.);
- Organza tape to beautifully tie a bow on a wreath.
Then everything is simple and fast.
|Press the shape of the circumference with a hanger.|
|Sneake the joint pliers. And align some without hook.|
|Break fastening balls to ride wire.|
|Balls need to be distributed evenly - so that no empty intervals remain. Balls must "look" in different directions.|
|If the ball does not want to take the right position, it can be fixed with a thermopystole or superclaim.|
|In the process, you need to ensure that the framework does not look out in the lumen.|
|The work continues until the whole Trepel is filled with balls.|
|It remains only to form a beautiful bow for a New Year's wreath and tie it to the hook or glue the thermal power.|
It is not necessary to let the Grandfather bag from the potatoes on the tapes. Burlap for decor can be bought in ribbons. They are different widths and lengths. It's not difficult to choose the optimal size and shade.
To create a wreath you will need a wire frame. Only not thin, but wide, woven in several revolutions, as in the photo below:
In addition to the foundation, only burlap, scissors, threads and decor are needed.
Such wreaths are better suited for a bulk decor in small quantities. The main decoration in this case is the texture of the canvas. A lot of small parts will simply lose in folds, spoiling a general impression.
On sale you can find not only a burlap of natural color. Festive red and green wreaths will look no less elegant and original.
Rattan is actually the same vine, but thicker and tight. In local latitudes, this liana is not growing, but ready-made Rattan carcasses are actively sold on the Internet.
Such a basis remains only to decorate. Decorations are mounted with a glue pistol or tied fine copper wire.
Rattan itself is rather dark, so it is usually painted in white for wreaths.
Several design options are shown below.
The domestic analogue of this Liana can be considered a wreath of girlish grapes. This vine, of course, is not smooth, but more branched and bitch - but it looks too pretty interesting.
Wreath of fate can be made in two ways.
The first option, as shown above in MK "Burlap." It is enough just to replace the coarse tissue on light fatin, and the handful will play with new paints. In this case, the decor needs to choose bright and light, as in the photo below.
In the manufacture of wreath in the second way, it turns out completely different (photo below).
To work, you will need:
- bulk base (ready made of foam or pipes);
- fatin or organza of three combined colors;
- glue pistol;
- tape for hanging;
First you need to cut fatin on the same rectangles 8-10 cm wide and 15-20 cm long. Further, everything is fast and easy.
Below are several ideas for decorating wreath.
Soft and fluffy cotton inflorescences. They resemble snow flakes, so they are often used to decorate the New Year's wreaths.
This material is very light, so it's well attached to any basis.
It is not necessary to hide the entire frame under cotton. With such a finish, the basis of branches or vines, as well as other natural materials: jute, textiles, traffic jam, etc.
Often cotton becomes only an auxiliary decor element. Several white smears of "snow" dilute brighter colors, giving a wreath finished and "winter" appearance.
It is worth noting that in stores for needlewomen cotton is quite expensive. Therefore, the real material is practically no one uses. Realistic and budget analogue can be made with your own hand from cotton and corrugated paper. MK on this topic is shown in the video below.
Classic round wreaths seem too banal? You can make a New Year's wreath in the shape of a star.
For such a craft, the frame is not needed. The list of necessary materials is small:
- smooth identical branches (can be replaced by a vine from a newspaper or long skeins);
- Thick thread or thin wire for binding;
- glue pistol;
The manufacturing process takes no more than 20 minutes. So this option will be a wonderful idea for crafts to school or kindergarten.
Such a craft can be decorated with a Christmas table or fireplace, and it is enough to stretch the tape through the top ray to hang it on the wall.
Another non-standard form for a wreath is a month.
The plywood harvesting for such a craft is easier to buy, but you can cut out of dense cardboard (the thin will not fit, it will be decking from PVA).
In addition to the workpiece, you will need:
- jute cord;
- glue pistol;
- white acrylic paint;
- brushes and sponges;
Work begins with the creation of a hinge for hanging, because a month should soar. To do this, the thread of Jute has been done through the hole at the top of the month and is tied up on two nodes.
On the pre-lubricated PVA, the workpiece is wounds a jute cord.
The glue must be made abundantly, and the threads knit very tightly, without clearance.
After completing the winding, the thread "is snowing" by white acrylic paint. It is applied rubbing the movements of the kitchen sponge.
In the same way, you can paint bumps and other decor.
Then it remains only to glue the decoration by the thermal power.
The volumetric decor is desirable to shift to the edge so that it goes beyond the crescent borders.
So the finished wreath will look aesthetically.
On the Christmas branches you can additionally apply acrylic "snow".
Step-by-step wreath manufacture shown in video:
For this craft, you will need only a few components on the ambulance hand:
- Wide base from dense cardboard;
- Many different pasta (bows, spirals, shells, etc.);
- PVA (a big bottle leaves);
- Gold paint (in a cylinder or gouache);
- satin ribbon;
- Christmas tree toy.
This wreath can be done with children. All materials are safe, and the process is fast and interesting.
|Frames thoroughly lubricate glue on one side.|
|Pour the macaron layer on it, evenly distributing them on the basis.|
|Cove the pasta by another layer of glue.|
|Alternate layers of PVA and Macaroni, until the base does not hide the base.|
|After drying the glue, you can start painting. It is easier to work with a canister, but if children are involved in the process, it is better to stay at Guashi.|
|When the paint is completely dry, wrapped the wreath in a green satin ribbon. If it slides, you can fix it in places (from the back side).|
|The edges of the tape are associated with each other, forming a loop for hanging.|
|Decorate the top of a wreath with a beautiful bow.|
|Extra decor with a christmas toy.|
The finished handicraft weighs decently, so it is better to install it vertically, and not hang.
Article in the topic: Crafts from pasta do it yourself. 30 step-by-step master classes
Multicolored flaps can be a wonderful decoration for a wreath. It is enough to wind the frame of cardboard or plywood with bright tissues - and the basis is ready.
Patchworks and additional decor are attached to a glue gun.
Weave from beads - quite a long and time consuming process. Therefore, only miniature wreaths are manufactured in this way.
These crafts can be hung on the Christmas tree as a toy, or make the New Year's chief magnets on the refrigerator.
To work, you will need:
- Thin wire (about 0.3 mm);
- Fat wire for a frame (about 1.3 mm);
- green beads;
|Strip on thin wire 7 beery.|
|Twist them in a loop.|
|To form one more such loop.|
|Similarly, make a whole tape from beaded loops (about 1.2 m long).|
|For a frame to wind a thick wire on any round base of a small diameter.|
|Frame ends tie fine wire. Complete the basis of the reps ribbon.|
|Billet from beads to wind on the frame.|
|The basis is ready, you can proceed to decorating.|
All decorations are mounted with a glue gun, and beads can be tied to the same fine wire.
It cannot be said that work with ribbons is very difficult. But this is definitely a long and painstaking process.
It is necessary to act very carefully so that all the details were smooth and the same - otherwise the finished wreath will remind the children's craft.
To work in the technique of "Kanzashi" will need:
- Cardboard frame with a diameter of 20 cm and a width of 8 cm;
- Felt for finishing the back of the base;
- Ribbons of gold, red and green colors with a width of 6 mm (approximate length is shown in the photo below);
- Wide tape for bow (4x18 cm).
You also need to be stocking with scissors, a ruler, a glue gun, a comb scallop and a lighter, or a candle for processing ends.
The most difficult thing is to make billets-Christmas trees.
Red and green are made equally. For each "tree" you will need 45 cm of a narrow tape, thermopystole and comb.
On the scallop, it is desirable to immediately apply labels for each "needle". Central - 10 teeth, each next pair into two teeth below.
First, the central needle is created. For this, the tape is passed between 10 and 11 teeth of combs.
The resulting loop is fixed at the bottom of the adhesive gun.
Similarly, the next pair of turns is made and glued.
But they should be a height of 8 teeth and slightly shifted to the edges.
The procedure is repeated at an altitude of 6 teeth.
The height of the last "needles" is 4 teeth.
The finished "twig" is neatly removed from combs.
If necessary, excess ribbons are cut off, and the edge is processed by fire.
Red and green "branches" will need 16 pcs.
Golds are made similarly, but they have "needles" of only three. Central height - 6 teeth, side - 4 teeth. For each will go about 14 cm tape.
Such blanks also need 16 pcs.
Cardboard frame applied to felt, circling and cut from fabric a similar "bagel". It must be glued to the back side to ennoble the back.
The next step is the creation of a fastening loop. It is made from the same golden tape (it will take about 25 cm).
The tape is glued with a thermalist in the upper part.
Christmas balls are glued there. They will hang inside the finished wreath.
For reliability, the connection point is strengthened by a fleece.
Red billets are glued along the top edge of the frame, starting from the top. Between adjacent details should remain gaps. They will subsequently take small golden twigs.
When a row of red blanks are glued, the golden "Christmas trees" are attached.
The latter goes the lower row of green "Christmas trees". These details are located between the red to close the gaps.
Summets that will definitely get at the bottom are filled with small pompons.
The decorative bow is made from a wide ribbon. For this edge bend to the center and sewn. At the same time, the tape must be a little "assign" to create beautiful folds.
To decorate the central part of the bow, you will need a node from the Golden Ribbon. It must be free and volumetric. Do not tighten the ends.
It is glued with a thermopystole, and the ends of the ribbon bend on the back side.
The finished bow is attached to the top of the wreath.
Such an exercise looks very bright. Wreath in white and blue or silver-lovandy tones looks much more gentle.
Production subtleties are shown in video:
The frame for such a wreath should be volumetric. Flat-based, you can independently add missing centimeters using old newspapers or bushings from toilet paper.
It is possible to reflect the back side with any fabric, such as jute or fleece. The leaf is cut to the "races" and glued with a thermopystole.
Threads for pumps can be any color. The main thing is that they have approximately the same thickness.
In addition to the frame and thread, only scissors, a thermopystole and decor are needed.
Work progress is shown in the table:
|Thread winds on the fingers with a thick layer.|
|Remove the workpiece from the fingers and skip the thread through the center of the loop in several revolutions, and then tie to several nodes tightly.|
|Cut the side "ears" of the resulting bow.|
|Crop the protruding threads and "fluff" pompon.|
|Similarly, make a lot of blanks of different colors and sizes.|
|Print ready-made pumps to the face of the frame in any order.|
|Pomponov jokes decorate gold beads.|
|Reduce the wreath by any decorations.|
Such a soft decoration looks very comfortable and warm, especially if you add hanging threads to it. In this embodiment, the wreath resembles a deciding ice cream.
With oranges and cinnamon
These ingredients can be decorate any wreath, regardless of the type and size of the base. Cinnamon and oranges are easily attached to the thermopystole, the main thing is to put the citrus citrus for the decor.
So that their slices are neat and beautiful, their thickness should not exceed 3-5 mm. In this case, they will dry in the oven evenly.
On the baking sheet, the orange is placed in one layer and set the mode with blowing. The temperature should be not too large (about 60-80 ° C).
Article in the topic: Citrus mood: how beautiful to dry orange for decoration and food
The heat drying process is unprecedented, but you should not increase the temperature. Otherwise, for the decor will have to use not dried, but baked oranges. And they look not very aesthetically.
With the right approach with such decorations, you can implement many wonderful ideas for decorating wreaths.
From polymer clay
Full massive wreaths from polymer clay are practically not done. From this material only miniature crafts or individual decor elements for large compositions are performed.
From a compact wreath can leave a wonderful souvenir or an interesting New Year's jewelry.
For the manufacture of crafts you will need:
- Polymer clay of green, red, white, orange and brown;
- Little metal loop for hanging.
|Move the green clay.|
|Cut a piece from it, size with a large currant.|
|Roll it into a thin cylinder.|
|Shape ring. Combine it so that it becomes flat.|
|Insert a small loop in the butche. Suitable from jewelry.|
|The remaining green clay roll into a thin cylinder. Give him a triangle shape and cut into small pieces of leaves.|
|Stick them on the basis. So that sharp tips are directed in different directions.|
|After the base was completely hidden under the "leaves", the toothpick will be required.|
|With its help in the center of each "leaf" is created a hollow-branch.|
|Small "leaves" are formed from the green clay and are fitted with a second layer over the first row (in the intervals). It is more convenient to work toothpick.|
|Red clay kneads, and a flat oval is made from it. From it you need to cut a rectangle - this is a future bow.|
|Edges bend to the center. Toothpick to grind clay in the middle, giving the shape of the bow.|
|Print the obtained decoration to the top of the wreath (from the looping side).|
|Of the two thinner cylinders, form "ribbons" and glue them to the center of the bow.|
|Lower ends bend in different directions.|
|Range several little brown balls. These are future cones.|
|Glue them on a wreath and shape the toothpick scales.|
|Similarly, roll out several small orange balls.|
|Give them toothpick the texture of the "orange peel".|
|Range two very thin cylinders - red and white.|
|Twist them in the spiral, and then ride on the table to level the edges.|
|Cut off a small piece from the workpiece and form the "marzipan candy" from it.|
|Decorate ready-made wreath of candy.|
Instead of the fastener looping to the workpiece, you can add a magnet, turning the craft to the decoration for the refrigerator.
This master class is discussed in detail in the video:
Nobilis is a breed of coniferous plants, specially derived to create New Year's wreaths and other decorative crafts. His branches are not deformed when drying, the needles do not shine and do not appear. The needles practically not ourselves, because it has a slightly different form, which is especially convenient for craftsmen.
The dried nobilis is only a little brighten and becomes more fragile. Therefore, with a careful attitude, such a craft can serve several years.
They form and decorate wreaths from the nobilis just like from pine or ordinary ate.
New Year wreaths with berries look very winning and effectively. Billets for the decor can be purchased at a finished form or make yourself (from fabric, polymer clay, etc.).
If the red color seems too bright, it can be muted, "linking" wreath.
The decor looks more spectacular if there is berries of different tones and sizes in one wreath.
Such decorations are well combined with a wicker base from the vine or grapes.
Below is one of the options for design wreath. It will take:
- braided frame;
- Small branches of needles (artificial);
- Red berries;
- The greens of muted shades (in the photo eucalyptus);
- Elegant tape with glitter.
All decorations are mounted as a thermopystole.
|First fixed the bag. So that the branches are directed in different directions.|
|It is complemented by the greens of other types for texture and volume.|
|The gaps are filled with twigs of bright berries.|
|The center of the composition is decorated with a bulk bow. From the same tape you can make a loop for hanging in the top of the wreath.|
When choosing a decor, the main thing to feel the measure. Too bright paints and abundance of shine will be tired.
At first glance, the flowers are absolutely not associated with New Year holidays. But such decorations are used when placing wreaths.
Winter flowers, for example, a Christmas tree look at the most organic. It is bright, volumetric and elegant. Such a flower usually becomes the central part of the composition.
The second common option is stylized flowers. In this case, the shape of buds make christmas toys or berries.
Glamor wreaths made of gentle roses, jasmine and lilies are in demand to decorate beauty salons. The combination of snow-covered needles and semi-abstract flowers as it is impossible to emphasize the entourage of such institutions.
To preserve the integrity of the interior in the same styles, the New Year's ate is drawn up.
You can also make flowers from the tape for the New Year's wreath in Shebbi-Chic style.
In Scandinavian style
Scandinavian style is the brutality and laconicity of the Vikings. In this embodiment, brilliant flower ribbons are invalid, bright wicker balls and similar decorations.
Forms and decor as simple as possible, natural and in something coarse.
The hidden frame can be made from any girlfriend. If part of the foundation remains in sight, it must match the wreath.
If on holidays you want to dilute such a strict design with something more cozy and original, you can add fabrics and wood. But also adjusted to the Scandinavian style.
In the technique of "Quilling"
Make a full-fledged wall-mounted wreath in "Quilling" technique is quite difficult. A beginner master with such work will not cope. It is easier to train on small crafts, for example, decorate the New Year's postcard openwork wreath.
To work, you will need:
- the base (a sheet of thick paper or a greeting card, which must be decorate with wreath);
- Stripes from colored paper (for queening). It will take several shades of green and contrasting color for berries;
- queening tools;
In compliance with all instructions, the result of the work will be a cute wreath, shown in the photo below.
|For the leaf, it will take a segment of green paper with a length of about 5 cm. Of it form a leaf with a sharp end.|
|Open ends need to be copper with glue and toothpicks.|
|Mix the leaf end in PVA and glue it to a postcard.|
|Similarly, make the next leaf from the strip of another shade. Printed it next to the first detail.|
|Continue to work, gradually forming a wreath from the leaves of different shades.|
|From the red strip twist a dense spiral-berry. Printed it to a wreath, in the gap between the leaves.|
|Evenly decorate the wreath of a "berry" of different sizes.|
|If in the process glue went beyond the crafts, carefully remove the drum sticks.|
Step-by-step manufacturing process is shown in video:
Advanced craftsmen can make more complex leaves and patterns.
Or make a big wall wreath in a quilling technique based on felt and cardboard.
Not necessarily to do all the product in this technique. You can decorate the finished base with a queen decor. Beautifully looking paper snowflakes on a wreath of fur or feathers.
In fact, this same wreath from the balls, but the Christmas toys in this case is replaced by chestnuts.
therefore List of materials and tools Virtually identical:
- The bulk base (it should be durable, since the finished handicraft will be quite severe);
- glue pistol;
- Brown fabric for decorating a frame;
- Wide bright tape for bow and hanging.
Further everything goes according to the standard scheme:
- Cut the fabric to the stripes, and reorganize the frame. Ends of ribbons fix the thermal power.
- Plee the workpiece by chestnuts, having them as close as possible to each other.
Then it remains only to decorate the base bow, cones or cheese.
If the gaps between chestnuts are large, they can be filled with decorative hay or large beads.
Such a drink is usually located on a festive table or on the fireplace. If the candle is performed solely decorative function (it will not fit), then there is no requirements for the decor.
READ ALSO: New Year's fireplace decoration: new ideas and classic options
To decorate the "working" candle, it is better to select non-flammable materials.
Materials required for manufacture:
- Cardboard for the base;
- Fabric for decorating a frame;
- Decor: cones, berries, needles, toys, etc.;
- Candle in glass.
Before starting work, you need to approximate the composition. To determine what size base is needed for a specific candle.
Several important points:
- If the candle is too low In addition to the base of the cardboard, you need to cut several circles. Such a step will help raise the flame over the decor;
- If an ordinary candle has been purchased, without a glass flask - Her bottom needs to tightly overtake the foil. It is impossible to fully use such a craft, but a couple of times to light the fire for beautiful photos is permissible.
It is not necessary to stop on a circular shape of a wreath. Using a footwear box as the basis, you can get a very original Christmas decoration.
For this natural wreath, the same natural basis is needed. A braided frame of straw is suitable (you can buy ready-made in stores for creativity), willow or girlish grapes.
In addition to him, we need only dyeing dry herbs, branches and a robust thread of a nonsense shade.
It is interesting: decoupage of Christmas champagne bottles with your own hands - 5 detailed master classes
When choosing a frame size, you need to proceed from the length and volume of dryers. If the beams are large, with high stems, the base must be a diameter of more than half a meter. Similarly, for small dryers, it is better to select a compact framework, otherwise the craft is "bald".
By collecting all the necessary blanks, you can start work.
It is better to leave such a wreath on the street, to decorate the front door or gate. In the apartment, the main thing will be the question - not to hang - and how close all the dry leaves and stems are appropriate. They will draw no matter how reliably the grass is accumulated to the frame.
From cotton disks
Cottage discs are an infinite source of ideas for crafts. For decoration of wreaths, they fit perfectly: white, soft, fluffy - real snowballs.
The frame for such jewelry should not be too tough. The basis of foam or insulation for pipes is ideal. With metal or cardboard will work not so comfortable.
Then it remains only to choose than to decorate the New Year's wreath. Options Weight:
- Roses. The disc is simply cutting down the spirals and minimize into the bud by fixing the thermoclaim;
- Large colors. It is enough to break two edges of the disk to the center, forming the petals. If the "tuchinka" will decorate a large decor, then the petals can be fixed with a stapler. In other cases, the edges are better to gently sew white thread;
- bulk waves. The disk must be folded 4 times and bore a sharp edge of the invisible or stapler. Such parts are based on an angle down;
- snowballs. Fill the VATA disk and pull the edges of the thread, as shown in the photo below.
Such a decor does not necessarily cover the whole base. CWAT discs can be used to form snow or individual parts.
Decoration with napkins is another budget and beautiful version of the New Year's wreath.
For the manufacture you will need only three components:
- glue pistol;
- Volume basis.
Given the low weight of the napkins, the frame can be made from the usual newspaper. It is enough to twist it into the spiral and wrap the assembly scotch, so that the edges are smooth.
Further everything is fast and easy.
The decor for such a workpiece should be as easy: Christmas balls, ribbons, bows, beads. Massive sweetheart, chestnuts or bumps will catch a napkin, spoiling the appearance of a wreath.
From clothespins and beads
In Handmade's stores, you can find bright decorative clothespins (or color conventional liners).
Pluging them on a wire frame or cardboard, you can quickly get an elegant Christmas wreath.
Beads will help hide the frame in the lumens between the clothespins.
From tree bark
Options for the manufacture of New Year's wreaths from the bark are a lot. It all depends on the quantity and sizes of pieces of bark available.
Wide and long fragments look beautifully on a bulk basis.
The intervals can be filled with decor from stabilized moss, multi-colored cones and traffic jams.
With small pieces will have to tinker. But they can also enclose the frame, laying out a bark as a mosaic.
The narrow and long bark can be riveted on a thin frame of a wire, creating a winter version of the sun.
Fast and simple option - make a wreath of drunk wood. But this decoration is not suitable for each interior.
Very non-standard way to decorate the entrance door - a wreath of ice. But this decor is suitable only for the northern regions.
All decor (bumps, cheeu, tangerines, berries, etc.) fold into silicone shape for cupcakes, pour water and freeze.
For greater brilliance, balls and beads can be attracted already over the finished wreath. They need to be very warm on the battery (not open fire, otherwise they will burst) and lean to ice. The top layer of wreath melts and quickly grabbing back, fixing the Christmas ball.
In the same way, you can hang a New Year's wreath on the door with a mirror without nails or glue. But it will only come true at very low temperatures. In -3--5 ° C, he fastest melts from warmth hands than he sticks to the entrance door.
Holders of private houses often hang out small icy wreaths on branches and transverse crossbars, so they will be sick in the sun.
From Papier Masha
Connecting a paper mass with glue or plaster, you can create real masterpieces. But newcomers can go in a simple way, take advantage of the finished trays for eggs.
The frame for such a wreath should be flat and quite wide (about 8 cm). Ideally suit fat cardboard, plywood or foam. It must be painted in white, or wrap a cloth.
Next, it is necessary to make blanks of colors from egg trays.
This will require a sharp stationery knife. Scissors work is not very convenient.
First, it is necessary to cut thin protruding "columns" separating eggs.
After this procedure, the tray will split into two halves.
The next stage is the separation from the cells of the eggs for eggs.
For each flower, four blanks of different sizes are needed. Internal "petals" are made from the "columns", external - from cells. If necessary, the "petals" is a bit bend inward or outward.
Billets are glued together in a single thermopystole. "Petals" of each layer must be slightly shifted relative to the previous series.
It remains to paint the blanks in white and glue.
Work with stabilized moss is easy. Such an ornament goes according to the standard scheme:
- Reduce the bulk base with a cloth.
- Glue a loop for hanging from twine;
- On the frame to uniformly apply glue and sprinkle with moss. Fibers close to the base tight.
- Glue decor to the workpiece.
For the manufacture of such an ornament will take no more than 20 minutes.
The soft and fluffy wreath of fur will be the "highlight" of Christmas decorations.
It will take no more than half an accessory for the manufacture of such an accessory. The main thing is to stock in advance with the necessary materials.
For work it will be necessary:
- Wire and insulation for pipes for 120 cm (for frame);
- fur (on a wreath with a diameter of about 35 cm leaves a segment of 30x120 cm);
- needle, thread, or sewing machine;
- glue pistol;
- Christmas tree toy;
- braid, ribbon or twine for hanging wreath and toys;
- Acrylic paints and brush.
|Fur roll up and sew a long edge.|
|Turn out the resulting pipe and insert the insulation into the fur.|
|Inside the wire and thoroughly twist her ends. The ends of the insulation glue the thermoclaim. The edges of the fur cover gently sew manually.|
|Attach the twine or braid to the toy and hang it on the fur blank. Tape length tape taking into account the formation of a hinge for hanging.|
Fluffy wreath is ready - you can hang on the wall.
The wreath of the acorns looks a little in itself.
But this problem is easily solved by adding gold beads or small balls.
The second option is to "block" acrylic acrylic strata. It can be applied using a kitchen sponge.
Otherwise, everything is standard: the base, the adhesive gun, acorns, decor and 20 minutes of free time - that's all the components of the New Year wreath.
CDs gradually go into the past, but this is not a reason to throw them out. Of these, a wonderful New Year's wreath can get. It is sufficient to stock the base of the plywood of a large diameter and a thermopystole.
Cardboard in this case is better not to use for the base, or glue it into several layers for greater stiffness.
It remains only to glue discs to a frame shiny up.
But before you take a thermopystole in the hands, they need to be uniformly decomposed on the basis.
The framework will be peeling through the central openings of the disks. To hide it, you need a second layer of knowledge custodians. It is placed.
After that, it remains only to decorate the craft of a bulk bow and glue the mount from the back.
In the rays of garlands and lamps, the finished handicraft seems bright and glowing.
Heat and in the winter cozy, the New Year's wreath of clubs.
Details of this craft are glued to a thermopystole.
It is more interesting to look at work in which all tangles have different size. But this does not mean that the craft will have to spend two vents of yarn.
You can significantly save the number of threads, winding them on the basis of old newspapers or flaps.
Then it will remain only to dilute the balls with christmas balls of different textures and shades.
From plastic bottles
Caring for nature is fashionable and useful. Instead of throwing out of harmful plastic, you can put it in business.
Cut the lower part and paint it with acrylic paint. From the cut to form petals by making a slot and bending the edges inside.
Holes in the center can be made of a hot selection or a drill. Further will only drive the blanks on a wire or braid, and decorate a wreath.
On this basis, the decor from mandarins, spices, balls or snowflakes will look good.
If individual parts do not want to occupy the place allotted by them, you can fix them with a thermopystole.
From salted dough
For the new year, you can decorate not only your own home, but also a festive table. For these purposes, a wreath of salt dough is remarkably suitable.
The dough creation recipe is very simple. You need to mix 4 pieces of flour, 2 parts of the salt and 1 part of the water. It is good to knead all the ingredients to a homogeneous state.
Next, about 1/3 on the decor should be divided from the total amount, and from the residue to form a ring. If you wish, it can be reserved into the harness or braid into the braid.
The decor is also selected arbitrarily: stars, berries, bows - everything is permissible. You can highlight a place under the New Year candles or Bengal lights.
Then it will only be left to send a blank to the oven to the state of light rosy. To maintain a festive atmosphere, you can paint the finished wreath in bright colors or add a bit of "snow" from flour or sugar powder.
This decor looks a bit cartoon, but very cute.
For such a wreath, three types of balls will be required:
- Shdm (two green, three red and four white);
- 10-inch (two golden);
- 5-inch (2 pcs. Any color).
Also need scissors and pump.
The whole process will take about 30 minutes.
|Inflate the pump and tie green shdm. On each side you need to leave "tails" with a length of 3-5 cm for binding.|
|Tie together two shdm.|
|Twist them in the spiral.|
|Tie "tails" on the other hand.|
|Similarly, to link the ends of the twisted spiral to the ring.|
|The basis of a wreath is ready.|
|Inflate two red shdm, so that at the end there is a tail of about 12 cm long. From these balls you will need to form "beads".|
|Short red end to tie to the node in the top of the wreath.|
|Shape beads from shdm.|
|Wrap it around the green base.|
|To the first shdm to bind the second and continue to form beads.|
|The resulting workpiece wrap the second side of the green base.|
|Bring the ball to the green node.|
|For the manufacture of the bell, you will need a 10-inch ball - 1 pc., 5-inch ball - 1 pc. and 1 shdm.|
|Inflatte the golden ball (inflate and pull), and then cut the ring from him.|
|SDM cut 1/3 and tie at the end of the node.|
|With the help of a long tube, bend the shdm in half.|
|Push it with a tube inside the Golden Bowl, so that the tips remain outside.|
|Inflate white shdm inside gold. In the process you need to hold the tips so that they do not fall inside.|
|Tie ends so that inside the Golden Bowl, the ring is from white shdm.|
|Lower it horizontally deep into. It will be the bottom (wide) part of the future "belling".|
|Insert the 5-inch ball and inflate.|
|Tie both balls and form a "bell".|
|Similarly, to make the second "bell" and tie them with each other.|
|Bind the bells to the top of the wreath, skipping the bracket between the red beads.|
|For a bow, you need to inflate 1 red shdm, leaving a tip 10-12 cm long.|
|Twist the first part - it will be a "tape".|
|Then shape a loop and a small ball - "node".|
|Then make the second loop and the "ribbon".|
|Tie a ready-made bow to the top node wreath tape.|
The top bow will block all the nodes, giving the craft finished look.
In the style of Tilda (from toys)
Tilde is the surname of the master who invented and embodied its own style of manufacturing author's dolls. They became incredibly popular, and after them there was a lot of diverse toys of similar design.
Decor in Tilde technique is combined with all types of frame:
- from the needles;
- from the vine;
- from tinsel;
- From yarn.
These cute soft toys are suitable for decorating a bedroom or nursery.
Below are several patterns for Christmas toys in the style of Tilda. Materials for them need to be filtered as natural as possible.
In the style of Harry Potter
In the last decade, it is easier to submit a new year without the "irony of fate" than without "Harry Potter." Therefore, Potteromans of all countries came up with a lot of options for designing wreaths in the style of a favorite work. Snacks, scarves, brooms, magic wands - all magic attributes go to the move.
Colors and shades for jewelry are selected in accordance with the palette of the beloved faculty.
A gift from a pack of orange or boxes of candies is boring and trite. It is better to make a present in the form of an edible wreath.
The festive table can be supplemented with a variety of delicious wreaths: from jelly, salads and cupcakes. This design will remain in the memory of all guests and family members.
Another option is a sweet present - a wreath of gingerbread. Ginger, honey, with cinnamon and poppy seeds - everyone can choose the perfect recipe.
Plus gingerbreads are that with proper packing - they can be stored for weeks. Therefore, such a decoration can be prepared in advance, completely devoting yourself to a creative process.
Wreath of meringue item is irreplaceable:
- It can be hung on the Christmas tree;
- use as decoration for a New Year's cake;
- Give friends and loved ones.
And all you need for happiness is a pair of proteins, sugar powder and a powerful mixer.
But Merengi is quite capricious. You should not postpone the manufacturer of a wreath on the last day, otherwise the festive mood can be spoiled by failed baking.
Make a chocolate wreath much easier. It is enough to purchase a suitable silicone shape and several tiles of high-quality chocolate. It will remain only melt in a water bath and pour into the form.
The frozen dessert can be decorated with any edible decor. In stores for confectioners, its assortment is huge.
Where to post?
Naturally, everyone has their own preferences and ways to solve this issue. But there are several common options.
In all foreign films, the wreath hangs on the entrance door from the street.
But this option is not very common in domestic apartment buildings. Therefore, decorations prefer to hang from the inside.
On the wall
Each house has at least one nail in the wall: for painting, bookshelf or lamp. It can be temporarily adapted to support New Year's wreath.
It is better to choose a place in the room in which the celebration will be held, but it is not fundamentally.
On the table
The location on the table can be considered classic. In the spirit of the traditions of Johann Viherne. To enhance the similarity, you can add a wreath with candles.
Such an accessory will add romantic mood and coziness.
But with rapid feasts, the candles are better not to fit. For security.
On the fireplace
Another option that came from Hollywood films.
This design looks gorgeous and solemnly. Usually, the wreaths complement the garlands from the needles and jewelry located on the fireplace shelf.
Naturally, there are no fireplaces in standard Kaminov and panels. But no one forbids making a decorative fireplace independently and decorate it with a beautiful wreath.
You can select a separate part of the room for New Year's attributes: spruce, wreath, fireplace, gifts and garlands. This place is remarkably suitable for New Year's photo sessions.
On the ceiling, chandelier
If the walls and doors are occupied by other decorations, and the fireplace is missing - the wreath can be suspended to the ceiling.
The easiest option is to secure it on the chandelier. The main thing is that the hook can resist double weight.
If there are doubts about the reliability of fastening the chandelier, it is enough to decorate it with a light tinsel and a couple of Christmas toys. Such a stylized wreath will look no less interesting.
If the wreath seems too small or simple, it can be placed in the frame. Such a solution will add solidity even a children's handicraft.
The frame can be placed on the table, dresser or fireplace shelf, or hang on the wall as a picture.
On the window
Such accommodation will help to admire the beauty not only to households, but also to all street passers-by.
But only enough mild wreaths can be attached to the window baguettes, otherwise the whole design can be found on the floor.
On the stand
If the wreath does not want to take the right position, it is possible to build a stand - a modern analogue of the old Soviet stand for books.
In this case, you can choose a favorable angle and angle for a photo.
On the head
Nobody canceled costume parties. But walking the whole New Year's Eve in a complex costume is inconvenient. Wreath on the head will help not stand out from the team at the beginning of the evening, and at the right time quickly and easily get rid of such a "suit."
How to hang?
Yes, there are almost in every apartment nails, but they are not always located where the decoration should be. So how to hang the New Year's wreath on the door without nails?
Somewhat simple ways:
- Scotch. This option is suitable for crafts of low weight and smooth surfaces (glass, metal). If you need to attach a wreath to a tree or wall, covered with wallpaper, it is better to use greasy tape. He will not leave marks and accurately hurts anything;
- Hooks with suckers. Such are usually used for curtain fixtures in the bathroom and bath towels. But this option is also suitable only in order to attach a light wreath to the iron door or window glass;
- There are also exist Special hooks that wear on top on the door canvas. But with their help, you can attach a wreath only to the nebelled entrance door.
Separately there is a way for fastening from the outside of the entrance door. To do this, you will need a thin line or wire. She needs to carefully tie the wreath and, making a loop, hang it on the opposing eyes.
How to decorate a ready wreath?
Choosing a decor for a wreath, need to take into account a few moments:
- Reliability and shape of the foundation. On a fine cardboard frame, it is not necessary to mount a heavy decor - just like a thin wire it will be inconvenient to glue volume decorations;
- age decorating. If children are involved in the process, all elements must be safe, hypoallergenic, etc. Let the better children make a wreath of sweets and sweets or weave from rubber, and do not cut about sharp glasses or breathe with aerosol paints;
- lifetime. It is not worth spending huge amounts on jewelry if a wreath goes to scrap in a couple of weeks. Cute design can also be created from budgetary options;
- Wreath location. Hang over your own head massive design of glass balls is not the best idea. First you need to decide on the location of the finished product, and, based on this, select the decorations.
Otherwise, there are no restrictions. You can safely include fantasy and experiment.
Very nice wreaths with backlit. Soft, scattered light The garlands instantly creates a New Year's mood.
Several warm lamps per seconds are able to turn a banal wreath of cardboard and tinsel to a real masterpiece.
But for the backlight, you need to choose monophonic garlands. Motion colors in combination with a wreath decor will be inappropriate. You will also have to think in advance how to hide and place the wires so that they are not visible.
See also: Decorating the window and curtains with a garlands from lights - Wonderful options
How to beautifully pack for a gift?
In most cases, decorations for wreaths are rather fragile. Therefore, it is better not to put it in the gift bags. The best solution will be a cardboard box.
It is advisable to choose the box "with the window" (transparent top cover). With this design, additional decorations are not needed.
In order for the wreath to look more spectacular, the bottom of the box must be caught with corrugated paper or sisal.
The litter from the decorative hay is suitable for wreaths from natural materials.
Small wreaths, which are only an addition to the main gift, can be made to decorate the gift box. To do this, they are tested to the top of the box.
Photo in the interior
Did you like the article? Tell us about friends:
The most pleasant meeting of the new year is preparation for it, home decoration, buying gifts.
Every year, decorate one and the same toys do not want anyone anyone. We try to bring something new and beautiful. A christmas wreath from Mishura can be such an interesting detail.
In many countries, such a wreath has long ago began to decorate the entrance doors of their home. It is not necessary to spend money on its manufacture, because you can make a New Year's wreath of Mishura do it yourself.
- Snow in the cylinder
- White paint
How to make a wreath of tinsel
Cut from the cardboard cut the circle of the desired size. It will be the basis of your wreath from Mishura.
Wrap tinsel around this foundation, while the ends must be fixed with scotch.
Try to wind Mishuur so that there are no passes and the base was not shifted.
After Mishur is wound, you can begin to decor. You can make a New Year's wreath of tinsel and cones. For this cone, you can first paint on the edges on the edges.
Use holographic sparkles to trigger on top of the cones.
With glue, fasten the cones on your New Year's wreath of tinsel.
This wreath is pretty simple in the manufacture. Of course, there are options for more chic wreaths for lovers of numerous jewelry.
All wreaths are made according to one principle, and the decorations depend on your imagination.
Another option how to make a Christmas wreath with your own hands from Mishura, you can see in the article
Do you want something unusual? - instead of a wreath you can hang on the door Square frame from Mishura
A nicely decorated house is a guarantee of a wonderful mood throughout all holidays. Your guests will be cozy with you, and you can enjoy the time spent at home. Therefore, do not be lazy to make a New Year's wreath of Mishura do it yourself.
Step-by-step description of the second wreath of Mishura
- Foam base
1. Secure the end of Mishura Scotch based on.
2. Circle tight tinsel in a circle
3. Secure the second end of scotch.
4. From above Make a loop from the satin ribbon to hang a wreath on the carnation or hook.
You can take the original tinsel with asterisks for wreath, then such a wreath will not require extra jewelry.