Craftsmanship: Step by step instructions 75 photos of making ships

Rains and streams create conditions so that the ladder of the homemade boats. Such games will turn the walks in pleasure, and the creation of homemade masterpieces - in an exciting adventure. Any dreams are easy to implement from paper, cardboard, tubes, wood, foam, walnuts, vegetables, in various techniques.

Brief content of the article:

Ship from traffic

There will always be traffic jams from under bottles. This is the easiest way to create crafts for the smallest.

Three tubes need to glue - this is the basis of the future ship. The role of the mast will perform the usual toothpick. A sail can be, for example, a piece of colored paper. In 2 places, the sail is a procurement to the toothpick, Krepim in the central plug - our ship is ready on the road.

To drive a ship, you can attach a pin with an eye to the extreme cork. A durable thick thread with a coil to tie for the ear pins. Now the child can pull the ship to pull the ship, where you need or return it if it hovers away.

Ship from Cardon

Here options simply do not count, it all depends on the fantasy.

To do this, we will need dairy packaging from cardboard. One long side is completely cut, from the outside for beauty you can leave the product with colored paper.

Side parts can be made curly, for example, the center is to make a little below the nose. Decorate the drawing drawing, write a name. You can cut a small round hole - the porthole.

In the center, fasten the mast from a thin stick, a sail on it. From the central sail you can stretch the rope to the nose of the ship, hang the 2nd sail.

To control, lock the durable thread with the coil on the nose of the product.

From dense cardboard, which remained after the acquisition of technology or phones, you can make a more complex, but spectacular frigate.

Master class on crafts boat

For sure by patterns (see the scheme), cut the base of the boat (deck of 3 parts and bottom), then to glue with a tape or tape.

For a pirated frigate, round embrasures are successfully found, cut from 2 sides from the feed.

To keep the mast, you need to glue several small cardboard circles or cotton discs, making the hole in the center the hole in the center.

Then these mugs with a mast and a sail are glued with double-sided tape or glue to the bottom of the frigate.

Coloring the product or salary with colored paper, more often children want blue color with white anchors.

For craftsmen, you can decorate the nose of the frigate with a dragon or a sea virgin. So it was accepted in past centuries.

Ship from wood

You can assemble in the square (park) small twigs, fallen from trees. Strong threads or adhesive gun join the sprigs together to get a raft. At the edges of the branches (across all), secure 2 twigs for the strength of the structure.

A wand from ice cream, if it becomes a great mast to breed. A sail will turn out of a piece of fabric or paper. Wrap your mast and can be sent to the yacht path.

Skip from foam

We will analyze another hand of a boat with your own hands. If a box of foam remains after the purchase, do not hurry to throw away. This is an excellent material for the construction of the yacht!

A small box can be involved completely, inside the mast wand inside.

It is possible from the mast to the corners of the boat to stretch the dense threads, to raise the multicolored flags.

Of the large foam, you can cut a small piece for the base. Top to glue 1-2 pieces of foam plastic - guns. Small chopsticks or matches pierce the guns, they can be painted with markers in different colors: red, yellow, blue.

From a wand from the ice cream to make a mast with a colored flag, it can be a monophonic or white sheet of painting with pirate symbols.

Shrink box

Bright volumetric crap crafts with their own hands are obtained from match boxes.

It will take:

  • Matchbox - 3 pcs.;
  • cardboard;
  • Colored paper (yellow, red);
  • Drink tube - 1 pc.;
  • Scissors and glue.

Detailed instructions, how to make a boat:

The boxes from the matches need to be glued: 2 box with short sides, and the 3rd from above in the middle (similar to the machine). Wait for complete drying.

Cut off the strip of colored paper equal to the width box, and the length A4.

Then you need to puncture our 3 glued box from all sides, as shown in the picture. For example, you can take blue paper.

Cut from cardboard (tight paper) Dark (blue) color 1-1.5 cm color width. Flexing in the middle, it turns out the nose of the ship. This strip glue to the sides of the boxes, and the ends of the paper should close the matchboxes. The nose of the boat will be sharp and empty.

On dense paper (cardboard), outlines the circuit of the crafts - it will be a bottom. Fix the bottom with a border on the shy nose.

Mast is convenient to make from a plastic tube for drinks, if not, you can twist a thin tube from ordinary paper. We start twisting from the corner diagonally sheet. In the upper box from the matches make a small hole for the mast.

Well lubricate the PVA glue for better bonding and insert the mast in the boxes.

Sails can be made of 2 different sheets of colored paper, better than bright yellow (red). On the sides of the short sides, it is possible to make smooth holes for masts.

A single color (for example, blue) make a double checkbox, as shown in the figure.

Through the holes, we produce 2 sails, you can paint them. From above on the mast glue checkbox. Since our flag is double, it will keep sails.

The guys love pirates, it means to draw the emblem of pirates on the sail.

Original boat ideas

The base of the pirated frigate can be a plastic bottle or a bottle of shampoo. They pierce with a skeleton of wood, glue the sail and flag. From bottled traffic jams to make sailors, wear them with multicolored outfits: jams and clothes (gluing a piece of fabric). Draw faces and fasten the figures to the bottle, the bottle.

For a deep boat, the crude zucchini is perfectly suitable. Cut the middle of the center, insert the sides of the tube with large leaves from plants (can be paper), planting sailors (dolls). On the side easy to scratch the name of the boat.

Glue sticks from ice cream, better in 2 rows in different directions. Secure the mast with a bright flag.

In the fall, you can take half from the shell of an empty walnut. Fasten with plasticine (glue) with a twig, pierced with a yellow (red, green) sheet of poplar, cock, and others. Colored boats are very beautiful.

We present to your attention the original photos of the cradle crap from different materials.

Photo of crafts of ships

DIY are an interesting view of leisure and a mandatory element of the school program for different subjects.

When a concrete task is to find a photo of the ship's crafts and make something similar, but only do it yourself, then he draws close attention to the ability to do this in a simple way and that it happened. Fortunately, today it is quite achievable.

Summary:

How easy and quickly make a ship yourself?

If it is required to make a qualitatively craft to the ship and do not arm special tools and expensive materials, that is, several non-hard solutions:

  1. Color cardboard;
  2. ordinary cardboard;
  3. paper;
  4. Styrofoam;
  5. Conventional drink tubes.

When working with these materials, additional connecting formulations are required or elements. It may be threads, PVA glue, glue from a pistol, plasticine and other solutions that will tell fantasy and the possibility of convenient use with a layout without damage to its appearance.

Cardboard ship for school

When it is required to make a school craft, then this is a very important moment for any student, because his work will be assessed, and therefore you need to try to make crafts from cardboard ships that will look attractively.

For this purpose, cardboard, paint and a little imagination. You can be inspired by the Internet or ready-made solutions that are presented in school (if any).

You can make a layout in appliqué format and accompany it with different materials for the decor, which will add volume designs.

Quality options for crafts from cardboard can be made from several simple elements that will create volume. There are even ready-made solutions in which one can make a full-fledged bottom or separate deck.

Military ships with interesting design

If you need a craft ship, then here without any examples do not do. It can be a big aircraft carrier or another type of ship that will be attractively looking as a craft.

Sometimes for the development of a beautiful layout, special models are used from a variety of individual elements, which together create a unique composition.

The process of their collection takes time, large patience and gluing individual elements in such a way that the seams are not noticeable, which means even accuracy.

That is why it is worth paying special attention to what option to choose and how long it will be necessary to collect. Starting with simpler models with large elements to achieve an initial inspirational result.

Who does not like the factory crafts, he can make his own version of the ship independently, using a variety of materials for this.

Paper ships and boats

Sometimes children are asked to make crafts from the ship in the form of a ship, but they cannot be properly cope with the task without using adults.

Nevertheless, there are universal assembly solutions that will help provide children to work and guarantee the beautiful result of their works.

There are many options for creating paper ships. You can take and paint the classic boat, which our parents played. You can seek help for the art of origami and choose a cradle that will match the skills.

There is also an option to make a beautiful volumetric applique of cardboard and fabric, which looks great and does not require a large number of fastening material.

Handy crafts

Beautiful handicraft ship will always be a subject that is worthy of admiration, because this is the result of the person's personal work, which shows his skills and skills. If it comes to children, then parents are trying to preserve the first crafts of their child for memory.

DIY with your own hands can be made of a variety of materials and should be focused on those that are in stock. To begin with the option of fabrics, paper, foam, etc.

After that, it is required to find an interesting layout on the network, but it is necessary to take into account the material in stock and not experiment with others, because it often leads to negative results.

After selecting the material and the manufacturing method, you can proceed directly to it. If the first time did not come out - you should not be very upset. There is always possible to repeat and make it better than last time.

Interesting spaceship options

When an aircraft ship is required, then in this case there are so many variations. As the basis, you can use the existing concepts of such ships or those that became a central element of the art film.

An option is a huge amount. If a large detail of the craft is required, then for this you can always find high-quality materials and choose them in such a way as to achieve the desired visual effect. Some crafts of this type include even the backlight.

Children's ship

Children in the kindergarten are imposed low demands in the learning process. That is why the ship for children in the kindergarten can be made of anything. The main thing is that the child is interested in the process to use only safe materials for health, and also avoided sharp items.

Photo of craft crafts

Please make repost;)

From the child can easily grow a designer or a sailor if his childhood is accompanied by the manufacture of ships. Although such a craft does not contribute to the choice of a future profession, how much does the logic and creativity develop in the benefit of further entertainment in the bathroom and not only. Therefore, there are so many videos on the Internet, how to make a ship, car, tank, etc.

And now the next nice news: for the manufacture of maritime model, simple remedies will need - paper, cardboard, wine plugs, etc.

Making a paper ship

This trick is familiar to each our compatriot, whose childhood and youth fell in Soviet years. Having reached this day, a boat boat can push its creator to new more complex experiments.

In the meantime, it is worth practicing on paper:

  • A4 format sheet twice collapses in half;
  • The resulting cut once unfolds to bend 2 corners to the center for the formation of a pyramid with a rectangular protrusion;
  • The external side of the protrusion wocks outside so that its corners can be bent for the triangle;
  • The inner side of the protrusion is also wrapped, and the corners are bent;
  • The resulting triangle need to push the walls inside to get a flat square;
  • Both sides of one half of the square are wrapped in another to form a triangle-harmonica;
  • The previous action must be repeated, and then - take up the tips and deploy the finished ship.

Knowing how to make a paper ship, you can move to more interesting designs.

Making a boat from cardboard

The previous paper model, contrary to the simplicity of its manufacture, quickly wets and loses the ability to swim. Also, the paper has a smaller density compared to cardboard.

Because of this, the latter is more relevant in the children's shipbuilding. In addition, cardboard allows you to more make a plausible sailboat:

  • On a cardboard sheet, there are lines of future walls and the bottom of the ship (first should be three - two lateral with a sharp tip and back board in the form of a rectangle or square);
  • Fragments are cut and glued to each other through a thermoclaus;
  • Inside the design, you can arrange a two-level "rowing bank" to install the mast.

The latter will fit the toothpick. But how to make a ship from a sail cardboard, so that the design resembles Drakkar Vikings?

First you need to fold the cross from two toothpicks. Next - to look at the bottom of the mast paper sheet and bring the latter to the horizontal beam.

It is also recommended to supplement the mast flag, the nose - the dragonf face of the cardboard. But then you have to attach the tail of the ship for its stability.

Production of a boat from wine plugs

A good alternative to the presented structures can be a sailboat from wine plugs. To make such a boat, it is enough to have:

  • Three corks;
  • Capron thread;
  • Toothpick;
  • Colored paper.

Gypsy needle need to do holes through the plugs so that the latter can be connected to each other by the capron thread. In the middle plug, a toothpick with a sail made of colored paper and now, the boat is ready.

Making a shrink box

This method answers the question of how to make the ship with your own hands so that the design resembles a modern steamer.

To do this, you will also have to arm a cardboard and colored paper:

  • First, the frame is made like the dragon;
  • Walls and bottom glued, and the boat is located inside the boat;
  • A small tube is cut out of the colored paper to imitate steam pipe.

Instead of the tube in the boxes, you can cut a skeleton for kebabs. If it takes place on the nose, then you can spend a thread to the mast. The thread will need for landing flags from multi-colored paper.

Production of a foam shoe

Easy ball-shaped material can serve as a frame for a frame. The foam cuts well, which makes it possible to experiment with the young designer with forms.

And you do not need to ask yourself how to make a spacecraft? It is enough to find a large piece of foam in order to cut the desired design from it, guided by the impressions from viewing the "Star Wars" or "Star Asane".

Ready spacecraft can be lowered into water. And if he exactly repeats the design of the muse, then his place on the shelf next to the ships in the bottle. By the way, the foam gives back painting that in the hand of young artists.

Production of a combined boat

After viewing models from cardboard, plugs, a matchbox and foaming, it is worth thinking about the combination of the corresponding materials:

  • Cork - suitable for rounded shapes that are inherent in guns;
  • Polyfoam - relevant to cut the onboard part;
  • Match boxes - the crew interior is well;
  • Cardboard is suitable for creating complex figures like sailors.

The corresponding combination serves as an excellent replacement for an expensive constructor.

Having created a ship from the girlfriend, the child soon will ask how to make a ship from Lego so that he reminds the battle.

In any case, the store structure is bad on the water, which cannot be said about the thematic analog.

Photo tips how to make a ship

A shoe from early childhood is played by everything - and girls, and boys. Most often, everything starts with everything from a paper boat, which we love to run on the puddles. And then, most often, the boys want to make more serious models of ships from girlfriend with their own hands.

There are many ways to make ships with your own hands - from the simplest ship from the paper sheet to these copies of the warships made of wood.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 1

Make a ship at home - it's not a difficult thing. But this is a wonderful reason to spend time with the child. First, try making ships according to the instructions, and you can add, you can add your strokes, invent your models.

How to make a paper boat with your own hands

The simplest ship are crafts from paper. They quickly fold, do not require much time to create, the child can decorate and paint it at will.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 2

How to make a two-pipe ship from Paper A4: Step-by-step scheme

Make a boat from a sheet of paper in different ways and models are obtained different. The most classic options are familiar to everyone, and the folding scheme of the ship from paper is transmitted from parents to children. But for those who forgot, there are step-by-step descriptions.

To make a motor ship, we need a sheet of paper and scissors.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 3

From a rectangular sheet of paper A4 make a square. Folds a sheet diagonally and cut off neatly strip from the edge.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 4

In the resulting square, all 4 corners fold to the center. Invert the workpiece and fold all the corners to the center again. And repeat again. Invert, the workpiece and turn two small squares - we obtain the pipes of the future ship.

We fold together these pipes and decay.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 5

Board from Paper A4: Classic Paper Option

Such an option of a paper ship is familiar to many. You can make it from a white sheet of paper and then paint, glue decor elements. But you can use colored paper to make your boat different from the rest. Such an option to make a boat is ideal for going for a walk in 10 minutes in rubber boots, and launch ships with friends in large puddles.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 6

To make a boat from a sheet of paper A4 we fold a sheet in half.

Top corners need to bend at right angles to the center.

Free edges of the sheet run up on both sides.

Turn free corners inside - the triangle will turn out.

Base angles need to be reduced together to get a square.

Ship for children: various ways to create with schemes and descriptions 8 11

Now you need to adjust the bottom corners on both sides up and again get a triangle.

The corners at the base of the triangle must be reduced together and get a square. Divide the top corners the workpiece to the sides.

Ship for children: various ways to create with schemes and descriptions 12 13

Drag the corners until you stop until the boat is.

Scatter all the corners of the ship to give it stability.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 14

Paper boat: Folding scheme

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 7

Showing your fantasy, you can create not one dozen different design ships.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 15

The boat with sail or flags will look original

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 16 Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 17

Ship from paper with your own hands: Step by step instructions

Knowing how to make a classic boat and a sailboat, you can try to make a double boat or catamaran. In order to make a catamaran, we need a sheet of paper and scissors.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 18

From the A4 sheet, we need to make a square sheet. We fold it in half, and then every half once again in half to the center.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 19

Rotate the rectangle 90 degrees and repeat the procedure with folding.

Turn the workpiece and see that it is broken into squares. We fold the opposite sides of the square to the center.

We take over the lower corners of the sheet and we are dragging them to the sides. We fold 2 internal squares diagonally.

Turn the workpiece and repeat the procedure on the other side.

Ship for children: various ways to create with diagrams and description 20 23 1

Bend layout in half and open up, creating volume.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 24

How to assemble a paper ship: Schemes

Send to your piggy bank more options for paper boats that are suitable for beginners and for experienced shipbuilders. Unusual crafts of ships with their own hands can decorate any children's room.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 25

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 26

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 27

Tip: In order for a paper boat for a long time, it is not risen in the water, plunge it into the melted paraffin, and dry. So he can push water from himself and serves longer.

How to make a warship from paper

Ask any boy, what is his favorite game and he will call war. They may be ground with the army of soldiers, or using aircraft, or ships.

Make a military boat from paper can easily. It is enough to choose any vehicle from paper, just paint it with appropriate colors, add military attributes.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 28

Such a ship can be made of green paper, or paint a white sheet under the camouflage in advance.

On a sheet of paper, we will spend two lines - horizontally and vertical.

The bottom of the leaf bend in half and turn the product.

Two edges of the shapes fold inside to the vertical line, they will play the role of the boat of the ship.

We will cut the corners at the bottom of the workpiece that will be a board of the ship.

We fold carefully the top and remove it upstairs immediately.

Crawling the corners on the sides.

We reveal the product on the outlined lines, and the edges of the top are closer to the center.

Turn the blank.

Paper Military Ship: Scheme

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 29 Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 30

Paper sail shoe: Step by step description with the scheme

A sail paper boat looks much more attractive, and more similar to the original. Make a sail ship is quite easy.

The easiest option is to make a classic boat and attach a mast with sails to it.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 73

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 74

Ship for children: Various ways to create with schemes and description Korabl Svoimi Rukami 75

You can immediately add a sailboat from paper. This will require a sheet of paper of any color.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 76

We make a square from the sheet of paper A4. Fold it diagonally in half to get a triangle.

Expand the sheet back and fold in half only the usual way.

Leaf Expand and fold again in half from the other side.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 77

Spray the sheet and bend to the center of the corner of the squares of squares. Bend in half the cradle and expand.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 78

The free left corner is lowered to the center and the opened envelope will be opened. Take this edge to side. We begin this angle inside the ship.

We will get something like a rhombus.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 79

Right corner Bend up - we get two sails in the end.

Bottom Correct to the center back and turn the product to face.

Such a boat can be decorated or drawing some details for the completeness of the picture.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 80

Ship: Applique of paper in kindergarten

Classes with colored paper are not only a cheerful pastime, colorful result, but also creative development. Kids, who are not for another 3 years, you can make blanks, cut the details in advance to stick them to a sheet of cardboard or paper. Older children can give scissors with rounded edges.

It is convenient to use glue - a pencil or pva with a tassel for appliqués.

Colored paper ship: Easy Applique

To make a beautiful and bright applique, we need a set of colored paper, scissors, glue, pencil, line.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 31

For colored paper, we transfer the details templates:

  • 3 clouds on blue paper,
  • Yellow triangle, blue check box,
  • Yellow half one
  • red rectangle
  • Blue hexagon,
  • 3 blue waves,
  • Black bird

The color of the ship can be safely replaced by those who will want a child anymore.

Ship Template: Paper Applique

At the bottom of the sheet, we glue two waves, leaving a place for the third wave.

We glue the deck in the form of a blue hexagon and perpendicularly red long rectangle - mast.

To the right of the red mast glue the yellow triangle, and the left was seized. On the mast place the flag. Right on the blue deck, between two waves, we glue the third wave.

Ship for children: various ways to create with diagrams and description 32 35

Ship: Applique in the younger group

For kids, prepare pre-printed details - you can even cut them in advance. This is important for children to understand which combine colors and have learned to understand the forms.

Print ready-made templates and help children understand which item where to glue.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 36

You can choose from several options, focusing on different degrees of complexity.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 37

Flower boat: Volumetric Applique

If you make some parts of volumetric, then the applique is more original. Details that create volume are glued at the last turn.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 38

Ship for children: Various ways to create with schemes and description Korabl Svoimi Rukami 39

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 40

How to make a bulk application: a boat in the senior group

In this work, the skills draw, and glue, and cut, as well as the creative talents of the child.

Materials:

  • White sheet A4.
  • Watercolor
  • Brush
  • Scissors
  • Colored paper
  • Feltolsters
  • PVA glue

We start with the design of the shoulder draft. Blue or blue pencil draw waves and clouds.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 42

Coloring blue watercolor blue background

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 43

In order to get a beautiful boat, you can print a template.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 44

Cut the details on color paper template

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 45

We glue the blue stripes that will be waves. We apply 3-4 drops of glue at an equal distance, from each other and they will attach the wave strips, making volume.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 46

On the main part of the ship, draw stripes and glue three blue mug - the porthole.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 47

Gang mast and flag

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 48

Now we glue a white sailboat

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 49

Ships on the raid: Applique in the preparatory group

On this applique, you can safely put several ships and make this work can be collectively. This process will help children learn to determine the parts of the ship. Each boat may differ in shape, deck color. You can depict pirated or warships.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 50

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 51

You can pre-paint the background

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 52

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 53

If the work is performed by a group of children, you can give a task to each child to create your model of the ship.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 54

Applique warship

Application of such a plan will be appropriate on postcards by February 23, or May 9. When children will make greeting cards for Dad or Grandparents, they will use the ability to make the applixation of a warship.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 55

You can use the template for the ship harvesting.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 56

Ship template for appliqué

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 57

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 58

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 59

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 60

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 61

Applique ship for the smallest

Kids should learn to work with scissors and glue, and also be able to draw the basic elements of nature before they go to school.

Therefore, such an applique as a boat to the sea, which is combined with drawing skills, will be a great training.

Materials:

  • Colored paper
  • Cardboard
  • Scissors
  • Glue
  • Chalks
  • Feltolsters

For the basics of the application we use a white sheet of cardboard.

Return a few strips of blue paper to glue them along the bottom edge of the base, making waves.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 62

Cut from colored paper Sunny, touches and ship items.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 63

Draw the birds and add your appliqué to other details.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 64

Ship from cardboard: how to make it yourself

The school is often asked to bring joint crafts of children and parents to the specified subject. On the marine theme is not difficult to come up with a craft of cardboard. The ship can make it possible to make an old box from under the technique.

Materials:

  • Tight Cardboard - Old Box
  • Scissors
  • Pencil
  • Glue
  • Scotch
  • Colored paper
  • Decor

Print or draw a template. Transfer it to cardboard

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 65

Cut the details from the cardboard

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 66

We collect a ship using glue and scotch

I will dilute PVA glue with water, narrating paper pieces and wonder in the glue. We glue pieces to ship harvesting

Ship for children: various ways to create with schemes and descriptions 67 68

You can paint the ship, plane with colored paper.

Also also make a mast from a plastic tube or wooden skewers. Do not forget that each ship must have a flag. Make sail from cardboard.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 69

And if you recently bought a refrigerator or another large household appliance, you can make a big ship from cardboard to the joy of any boy.

Ship for children: Various ways to create with schemes and description Korabl Svoimi Rukami 70

Cardboard and paper boat

Cardboard - a very convenient material for crafts, and colored paper will help make a craft bright and attractive. In order for the work to be beautiful and neat, use good scissors that will not tear the cardboard, and beautifully and smoothly make a cut. If the child is early to use sharp scissors, then parents can do it for them.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 71

The bushings from the toilet paper are also actively used in the crafts due to the form.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 72

Simple boat from paper in Origami technique

Origami is very useful for children, as develops motility hands. After all, in order to make a craft in the Origami technique, you will need to make a lot of small operations. Since the process is used only paper, it is considered not costly.

Paper origami boat: Canoeing

Such a boat will be stronger classic and you can plant a figure. Thanks to the step-by-step scheme you can make it quickly.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 81 Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 82

In the same way, you can make another option of a simple boat from paper.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 83

Let's start work with what we will make a square of the square.

Bend it horizontally and expand it back.

Bend the lower and top parts to the central sequin.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 84

I wipe the central fold in the opposite direction and we get a zigzag out of four sides.

We will open one side like the book.

Free upper edge Soak so that it is located on the central sequel

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 85

The second angle fold to the center.

From the reverse side of the rectangle, too, drove the corners to the center.

We fold the boat in half.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 86

Turn the craft with narrow corners down and open the boat.

Wrap one sharp nose to the center

Repeat it with the second part to get a hexagon

Top and bottom sharp corners wrap 0.5 cm.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 87

We will reveal the received boat and eating sides, making the bend in turn from two sides of the crafts.

Films need to be fine. Straighten your craft carefully.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 88

How to make a vehicle from the tree do it yourself

Wooden boat is the dream of every boy. Together with dad or grandfather, you can add the simplest boat option.

To keep the tree longer, you can paint or cover with varnish.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 89

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 90

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 91

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 92

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 93

How to make a ship from shells with your own hands

Brought many seashells from the sea? They can be applied and beautifully arrange, making a booster boat. On the resorts are sold for ready-made souvenirs in the form of ships from seashells, but much more pleasant to put a craft on the shelf made by the hands of his child.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 94

Materials:

  • Large shell
  • Small shells
  • Super glue
  • Braid

Come up with the scheme of your ship.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 95

We fold several shells in a row with toothpick. It will be more beautiful if you make a seashell in size - downstairs is wider, and to the top smaller.

Lubricate the toothpick with glue and attach the shell. Leave to dry.

Ship for children: various ways to create with schemes and descriptions 96 97

Attach these sails to the big shell. The base of the toothpicks should be missed with glue abundantly.

Ship for children: various ways to create with schemes and descriptions 98 99

Use a chain or a gold braid. Watch her mast. In order for the ship exactly standing, you can glue a big sink to a quarter or smooth stone.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 100

Foam ship with her own hands for children

Do not rush to throw out the foam after buying household appliances, especially if you have children. He can come in handy in order to make a boat boat.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 101

Materials:

  • Slices of foamflast
  • Toothpick
  • Knife
  • A thread
  • Film for decor
  • Colored paper

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 102

Cut with a knife shape of a boat - two rectangles of different sizes. A large rectangle needs to do sharp nose.

Using glue or toothpicks Connect both parts

Ship for children: various ways to create with diagrams and description 103 104 1

It remains to decorate a boat. In this question, you can give a child to the field for creativity.

From paper, cut out the checkboxes and glue the mast checkbox.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 105

You can add the ship to the second toothpick and tie them with a rope or thread. Behind the deck insert another toothpick. The fastening points of the thread can be lubricated with glue.

Ship for children: various ways to create with schemes and description 106 107

Extreme toothpicks need to shorten.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 108

Thread will hang small flags folded in half.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 109

Another option of the mast of the foam ship.

We will make a cross from two toothpicks and wrap the thread. Broke the ends.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 110

Sail can be made of wood leaf, or from fabric.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 111 Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 112

For a more complex design of the ship out of foam, it will take more time.

Materials:

  • 2 foam sheet - 5 cm thickness
  • Lesk
  • Sticks for sushi
  • Hot glue
  • Fabric for sails
  • Clip
  • Super glue
  • Knife
  • Sandpaper
  • Rule
  • Pencil

Let's start with the ship housing:

Draw a rectangle and rejected two angle on one side.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 113

For the captain's cabin, we need two squares

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 114

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 115

Thumbnish square glue to the back of the case, shifting a little back.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 116

From the second thin square, cut the corners like on the housing

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 117

We glue the second part on the nose of the ship

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 118

How to make a mast ship:

Cut off two sticks and make a cross, covering in the middle of the stick with super glue.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 119

From the old fabric, cut the square for the sail. In the middle we make an incision. So it will be easier to reinforce the sail. Seal the edges near the horizontal stick and secure the stapler.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 120

Make a hook from the clips to insert the casing sides and attach the lower edges of the sails to them.

Ship for children: various ways to create with schemes and description Korabl Svoimi Rukami 121

More interesting articles on needlework:

Every year adults and children are waiting for spring offensive. When the snow begins to melting, quick streams appear everywhere - it's time to play ships, launching them in natural conditions, and not in a basin. From the generation to generation are transferred to "secret knowledge", how to make a beautiful and water-resistant boat. Children along with their parents, grandparents master the manufacturing technology and create entire paper flotillas to compete with friends in the spring.

Production of paper crafts is a very interesting creative occupation. Of particular interest is the origami technique, in which the figures are folded without glue and scissors. The process of the appearance of the paper sheet figures becomes a real magic for a child, to whom he can learn and himself.

Origami is developing patience and accuracy, trains the ability to concentrate attention on the process. Over time, children's fingers become delicious, and children can add more and more complex figures.

Ships in Origami

To create a boat, you will need special paper for origami, which can be purchased in stores for creativity. But for simple models, you can use the ordinary office paper of A4 format or one-sided colored paper (in this case, it is easier to explain to the child to work with the facial and the wrong side of the workpiece).

Molded paper taken from the old magazine will make a boat a little more durable in the water. And if you dip the finished craft in the melted paraffin, then the ship will become waterproof, almost like real. In addition, it is necessary to stock line or pencil to stroke the fold lines and settled in a well-lit place.

You can start creating a paper fleet.

Interesting options for homemade boats

Simple ship

A simple boat will be able to make children aged for 3-4 years. The square sheet of paper is diagonally, then again. In about the middle of the lower line, the resulting triangle mark a landmark. From this point, a small triangle is folded, carefully smoothing the bends. We are planned an approximate line of the side, bend and turn the sides on both sides. If the boat is made from monophonic paper, it can be painted with pencils or woven.

Classic Ship

A classic type of many since childhood. The rectangular sheet must be folded in half and mark the middle. Bend side sides to the middle. The rectangular portion is bent upstairs, the blank turns over, and the action is repeated.

The corners formed by the side are becoming at the basis of the workpiece on both sides - first the upper, then the lower. If a paper headdress is needed, then at this stage you can stop. And if the boat is done, it is necessary to straighten the blank in the form of a square, connecting opposite angles, and the lower angle of the top layer to complete up, then flip and repeat. Reop out the blank and fold the square. Carefully pull the upper corners to the sides.

Simple sailboat

A sailboat can be made of a square sheet, which is folded in half horizontally and vertically. The top and bottom of the workpiece bend to the middle. Next, the side parts are bent. The upper corner on the right side must be reappeared, aligning its lower diagonal fold. In the same way to straighten the remaining angles. Next, it is necessary to pull the halves of the workpiece - right to yourself, left from yourself. Speaking the lower corner to wrap the right. Droplet glue to connect board in the nose.

Colored sailboat

Colored sailboat is made of white and blue single-sided paper. The square sheet is folded in half horizontally and vertical. The billet turns over the other side and develops on diagonals. On the white side, two opposite angle bend to the center.

For the formation of sails, it is necessary to bend the workpiece so that the white triangle is obtained from above, located vertically. Repeat on the other side. To reduce one of the sails, you need to bend it down, and then up again, leaving a small fold, which refills inside. The lower part of the sailboat bends on the opposite direction, and with the front side of the handwriting looks like a blue boat with white sails.

Two-pipe steamer

Such a steamer folds from the square. The sheet bend down to diagonals to designate the central point. All four corners bend to the center. The billet is turned over, and the action is repeated. The cauldron turns over again, and the angles are again bent to the center. In the corners of the workpiece, pockets are obtained, two of which, in opposite angles, should be revealed. Unscrewed corners are stretched, and it turns out a toy that will not only look good on a flat surface, but also sustainably behave on the water.

Boat

The boat has a design more, the children of school age will be able to cope with it. A square sheet of paper is diagonally to diagonals, the center of the workpiece is noted. The upper and lower lines are sweeping to the center to get a rectangle.

All four corners of the workpiece bend to the middle. Next, the two upper and two lower angle are wrapped up to the middle (do not forget how to stroke the bends with your fingers or ruler). The upper and lower corners of the resulting rhombus are summarized to the workpiece center, the model turns out and occupies its place in the paper flotilla.

Vehicles for the manufacture of ships in the origami technique there are many more. Boats, catamarans, motorboats, boats, junks - for children who are interested in the development of origami, you can select complicating schemes with step-by-step instructions. The main thing is that the process of creating a new toy delivered the child's pleasure.

Ships in other technicians

A pretty toy in bright summer tones can be made of multicolored cardboard. For a frame, you need to cut two blue stripes, divide them into three parts and bend in these places. Glue the ends of the strips together to get the nose and feed. From the blue cardboard, part of the deck is cut into the form of a rectangle, the edges of which are bent and glued between the frames of the frame.

From yellow paper, you need to cut two rectangles of different sizes for sails, make small holes in them and insert a wooden skewer-mast through them. Next, do the hole in the deck and insert the mast there. From red paper cut fluttering flag and glue it to mast. The portholes and other details can be drawn by a felt-tip pen, and on the deck to place the toy figures of sailors or pirates.

Also, many ideas of paper boats can be implemented in applications using as a model, for example, an ancient East Puzzle "Tangram" or various mosaic patterns.

Children can master a variety of ways to create toy ships. Today there is no shortage of training materials, diagrams and instructions. And adult attention to this lesson will make it even more fascinating.

Photo ideas of homemade original ships

Well, here he and promised MK

(Read also at http://sweetflory.jimdo.com/master-classes/Crabl/)

This is my first MK of such a plan, on work I had to write technologies, but it is something else, so do not blame me. Since the ship was made by raids between other works, sometimes forgot to take pictures. In general, if there are questions - ask!

  • To begin with, we prepare the templates of the ship "top view", the Pleasurex translate the image (the prototype of this ship was the ship of Columbus "Santa Maria").
  • Ship do-it-yourself: Step-by-step photo and master class for beginnersShip do-it-yourself: Step-by-step photo and master class for beginners
  • Then cut this layer

Ship do-it-yourself: Step-by-step photo and master class for beginners

For one ship, we will need two such plates, we throw the PVA to glue and fasten the skeins to make the blanks did not go.

Ship do-it-yourself: Step-by-step photo and master class for beginners

  1. Apply the next template "side view" and cut out on it
  2. Ship do-it-yourself: Step-by-step photo and master class for beginnersShip do-it-yourself: Step-by-step photo and master class for beginners
  3. We extend the stern

Ship do-it-yourself: Step-by-step photo and master class for beginners

Another template "bottom view" and cut out on it

Ship do-it-yourself: Step-by-step photo and master class for beginners

Then make the stern part of the ship and we are calculated

Ship do-it-yourself: Step-by-step photo and master class for beginners

Here in the end we have such a layout of the ship

Ship do-it-yourself: Step-by-step photo and master class for beginners

  • We glue all the details between yourself and proceed to the corrugated body cover
  • The covered ship is starting to shock candies from the bottom up
  • We also glue a deck (here, unfortunately he was fascinated by the process and forgot to take a picture, but I think the essence is clear).
  • The next stage is the construction of masts and ray
  • To do this, glue through the skewers, 4 for the largest central mast (grotto), three and 2, and begin to insert them into the ship's housing.
  • They stick to them from above another series of spedes, but already glued together by 2
  • We build this back mast (Bizan Mast) and Rei
  • That's what happens in the end
  • Then proceed to the manufacture of Mars (platforms for fastening the rope), for this, cut the circle from the cardboard, first external, then internal
  • We begin to build Mars, for this we glue around the trimming of toothpicks
  • Krepim is a matter of mast
  • We have two of such Mars, but different sizes
  • We make a Marse platform on the back mast (simplified form)
  • We make the basis for fastening telexia (guy)
  • Bottom fastening VANT, again from the skeins
  • We proceed to the stretch of cables (beads immutate the tension blocks)
  • On the nasal mast (bushprit), too, make the platform and stretch the guys
  • That's what happens in the end
  • The next stage is sails,
  • Cut the sail, we apply a drawing on it and glue it to a spare
  • And krepim to the corresponding rehe (unfortunately, again got carried away and there are no few pictures)
  • Cooking the stand for the ship, imitate the waves
  • First layer of corrugation
  • Then grid
  • On the resulting stand glue ship housing
  • We make flags and pennants, and all our boat is ready for swimming!

A source: https://www.babyblog.ru/community/post/rukodelie/1157351

Craft ship: 120 photos, templates, drawings and step-by-step instructions How to make a boat

DIY are an interesting view of leisure and a mandatory element of the school program for different subjects.

Ship do-it-yourself: Step-by-step photo and master class for beginners

When a concrete task is to find a photo of the ship's crafts and make something similar, but only do it yourself, then he draws close attention to the ability to do this in a simple way and that it happened. Fortunately, today it is quite achievable.

Ship do-it-yourself: Step-by-step photo and master class for beginners

How easy and quickly make a ship yourself?

If it is required to make a qualitatively craft to the ship and do not arm special tools and expensive materials, that is, several non-hard solutions:

  1. Color cardboard;
  2. ordinary cardboard;
  3. paper;
  4. Styrofoam;
  5. Conventional drink tubes.

Ship do-it-yourself: Step-by-step photo and master class for beginners

When working with these materials, additional connecting formulations are required or elements. It may be threads, PVA glue, glue from a pistol, plasticine and other solutions that will tell fantasy and the possibility of convenient use with a layout without damage to its appearance.

Ship do-it-yourself: Step-by-step photo and master class for beginnersShip do-it-yourself: Step-by-step photo and master class for beginnersShip do-it-yourself: Step-by-step photo and master class for beginnersShip do-it-yourself: Step-by-step photo and master class for beginnersShip do-it-yourself: Step-by-step photo and master class for beginnersShip do-it-yourself: Step-by-step photo and master class for beginnersShip do-it-yourself: Step-by-step photo and master class for beginners

Cardboard ship for school

When it is required to make a school craft, then this is a very important moment for any student, because his work will be assessed, and therefore you need to try to make crafts from cardboard ships that will look attractively.

For this purpose, cardboard, paint and a little imagination. You can be inspired by the Internet or ready-made solutions that are presented in school (if any).

  • You can make a layout in appliqué format and accompany it with different materials for the decor, which will add volume designs.

Quality options for crafts from cardboard can be made from several simple elements that will create volume. There are even ready-made solutions in which one can make a full-fledged bottom or separate deck.

We recommend reading:

Military ships with interesting design

If you need a craft ship, then here without any examples do not do. It can be a big aircraft carrier or another type of ship that will be attractively looking as a craft.

  1. Sometimes for the development of a beautiful layout, special models are used from a variety of individual elements, which together create a unique composition.

The process of their collection takes time, large patience and gluing individual elements in such a way that the seams are not noticeable, which means even accuracy.

That is why it is worth paying special attention to what option to choose and how long it will be necessary to collect. Starting with simpler models with large elements to achieve an initial inspirational result.

  • Who does not like the factory crafts, he can make his own version of the ship independently, using a variety of materials for this.

We recommend reading:

Paper ships and boats

Sometimes children are asked to make crafts from the ship in the form of a ship, but they cannot be properly cope with the task without using adults.

  1. Nevertheless, there are universal assembly solutions that will help provide children to work and guarantee the beautiful result of their works.

There are many options for creating paper ships. You can take and paint the classic boat, which our parents played. You can seek help for the art of origami and choose a cradle that will match the skills.

  • There is also an option to make a beautiful volumetric applique of cardboard and fabric, which looks great and does not require a large number of fastening material.

Handy crafts

Beautiful handicraft ship will always be a subject that is worthy of admiration, because this is the result of the person's personal work, which shows his skills and skills. If it comes to children, then parents are trying to preserve the first crafts of their child for memory.

DIY with your own hands can be made of a variety of materials and should be focused on those that are in stock. To begin with the option of fabrics, paper, foam, etc.

We recommend reading:

  1. After that, it is required to find an interesting layout on the network, but it is necessary to take into account the material in stock and not experiment with others, because it often leads to negative results.

After selecting the material and the manufacturing method, you can proceed directly to it. If the first time did not come out - you should not be very upset.

There is always possible to repeat and make it better than last time.

Interesting spaceship options

When an aircraft ship is required, then in this case there are so many variations. As the basis, you can use the existing concepts of such ships or those that became a central element of the art film.

An option is a huge amount. If a large detail of the craft is required, then for this you can always find high-quality materials and choose them in such a way as to achieve the desired visual effect. Some crafts of this type include even the backlight.

Children's ship

Children in the kindergarten are imposed low demands in the learning process. That is why the ship for children in the kindergarten can be made of anything. The main thing is that the child is interested in the process to use only safe materials for health, and also avoided sharp items.

Photo of craft crafts

Please make repost;)

A source: https://podelki.pro/podelka-korabl/

Craftship of a boat with your own hands - master classes for the manufacture of paper and girlfriend, photo ideas

Fun to launch boats have long been well known to every person. So they did more than our great-grandmothers and great-grandfathers in childhood - all sorts of ships, isolated from the airtal sheet or made from undergraduated funds, they competed in speed, overcoming street streams of melt water in the spring or launched in the river and lake in the summer.

Ship do-it-yourself: Step-by-step photo and master class for beginners

Methods for the manufacture of homemade ships are amazing imagination - any available materials have been going on to create their own, unlike other ships. We will tell you about how to make a ship with your own hands in this article.

Ship do-it-yourself: Step-by-step photo and master class for beginners Ship do-it-yourself: Step-by-step photo and master class for beginners Ship do-it-yourself: Step-by-step photo and master class for beginners

The fastest and easiest way to make a boat is considered an origami technique - for such a ship you will need only a few minutes of time and one notebook or newspaper sheet.

Ship do-it-yourself: Step-by-step photo and master class for beginners

For the manufacture you need to stick to a few simple steps:

  • Take a rectangular sheet and fold it in half. On the fold line, close the middle and bend the sides so that the sheet takes the shape of the triangle;
  • Protruding parts of a sheet under the triangle bend up on both sides;
  • Formed corners alternately fuel for the triangular base of the future ship. As a result, you should turn out a triangular craft blank;
  • Pour the workpiece so that it resembles a hat, empty inside. To do this, take the opposite angles of the base and twist them together - you will get a billet for a square shape;
  • Bend the lower corners of the square up and re-give the billet in the square shape;
  • Gently stretch the square to the side of the top corners. You have to get a ship, which remains slightly straightening the bottom, and it is ready for sending to swimming!

Ship do-it-yourself: Step-by-step photo and master class for beginners

As you can see, nothing complicated in the origami method. For the manufacture of a boat, you can use both an ordinary notebook, and scrap- or colored paper. With the help of glue, you can attach decorations in the form of cut pictures or paint the board with pencils.

Ship do-it-yourself: Step-by-step photo and master class for beginners

But despite the advantages of this method in the form of ease of execution, it is not devoid of flaws: paper ships are short-lived, they quickly flush and can not stay afloat for a long time.

Ship do-it-yourself: Step-by-step photo and master class for beginners

Craftsman crab craft

In the case when you want to make a boat with your own hands, you can use any blowing materials. Boxes or match boxes, pieces of fabric and cardboard - you can use anything. As an example, consider the method of manufacturing a boat out of the box from under juice and other materials.

Ship do-it-yourself: Step-by-step photo and master class for beginners

How to make a boat out of the beverage box

To begin with, we will define the choice of box for the future side of the ship. Best boxes from under milk or juice are suitable - they do not wet due to multi-layeredness. In addition, we will need:

  • Scissors;
  • PVA or tape glue;
  • Ordinary cardboard;
  • Small piece of fabric;
  • Straight branch or any other direct item (you can use a pencil).

Ship do-it-yourself: Step-by-step photo and master class for beginners

The material used can be changed at will, it all depends on how you want to make your ship. The creation process implies a few simple steps:

  1. The first make cut the base of the boat out of the box. First cut the rectangle with scissors on one side of the box;
  2. Two rectangular triangles are cut out of the cardboard and one isced to glue a shoe nose. Triangles are glued together as a pyramid without a single face with a tape or glue so that the rectangular triangles are on the sides of the ship. The resulting nose is glued to the box;
  3. Now you need to install the mast and sail of the ship. To do this, stick to the bottom of the box of a wand to the bottom of the ship where you cut a rectangle. At the request, the mast can be strengthened by a piece of plasticine or dense cardboard;
  4. For the sail, take a rectangular piece of fabric. Follow the two holes in the middle at the top and below. Put on the fabric on the mast and straighte the sail manner. In places of tissue with a mast, you can apply glue for reliable fixation.
  • Thus, the ship from undergraduate materials is ready, it takes quite a bit of time for its execution, the materials will easily find at home, and even a child will cope with the technique.

By making your ship, you can use any other materials and design principles. Optionally, you can add a second mast or decorate the board with decorative elements, cut the windows of the cabin or glue the miniature guns and the steering wheel - it all depends on your desire and fantasy.

  1. In addition to simple examples of manufacture, a large selection of examples and various schemes for creating models of ships are available on the Internet, right up to exact copies of the existing pirates, legendary Spanish galleons or British frigates.

Simulation of ships is a fascinating occupation, you can make detailed models, drinking, bonding and staining all parts by manually from plywood or plastic.

  • If the process of complete creation of the ship is too time-consuming - you can purchase already ready-made sets of parts with the assembly instructions in specialized online stores, for the assembly of which is also pleased to spend time with your family and friends, as we send the finished ship in swimming.

Photo of the ideas of homemade crap craft

Paper minecraft - a selection of master classes to create models from the game Paper for decoupage - views, apparel technique, photo examples

A source: https://podelki.guru/podelka-korablik

Ship do it yourself

Hello dear readers, in this article I will tell you how to make a boat with my own hands. These simple crafts can repeat anyone, without special tools and skills, gathering them, literally from girlfriend. And finished boats will bring a lot of joy to children and their parents. Let's get started!

Paper boat do it yourself

The easiest to repetition is a small homemade boat from a regular sheet of paper that you fold according to the scheme. This technology is called origami. Below will be given several models from simple - to complex.

For manufacture you will need:

  • Several sheets of paper A4
  • Scissors
  • The instructions below

Ship from paper with your own hands Step-by-step instructions

Paper boat with their own hands

Ship do-it-yourself: Step-by-step photo and master class for beginners

Step 1: Take a sheet of paper and fold it in half

Ship do-it-yourself: Step-by-step photo and master class for beginners

Step 2: Receive the top corners of the paper sheet to obtain a triangle. It will be a sail!

Ship do-it-yourself: Step-by-step photo and master class for beginners

Step 3: Fold two lower layers of paper in different directions.

Ship do-it-yourself: Step-by-step photo and master class for beginners

Step 4: Bend corners of folded paper strips inside.

Ship do-it-yourself: Step-by-step photo and master class for beginners

Step 5: Fold together the right and left corners of the resulting triangle.

Ship do-it-yourself: Step-by-step photo and master class for beginners

Step 7: Corners of the resulting square fold up, as shown in the figure.

Ship do-it-yourself: Step-by-step photo and master class for beginners

Step 8: Share the resulting triangle as in step 4.

Ship do-it-yourself: Step-by-step photo and master class for beginners

Step 9: Pull the top corners and straighten. The boat is ready!

Ship do-it-yourself: Step-by-step photo and master class for beginners

Paper motor ship with their own hands

For the manufacture of this ship will need scissors.

From a rectangular sheet of paper, we make a square by starting its angle diagonally and cut off the extra

Ship do-it-yourself: Step-by-step photo and master class for beginners

  • Following this instruction, you will get such a boat!
  • Step 1: Take the resulting square and generate all four corners to the center.
  • Step 2: Turn over and reap the corners again.
  • Step 3: And another time!
  • Step 4: Turn over the whole square and deploying two small quadics. We will get the "pipes" of our ship.

Step 5: Fold the "pipes" together and smooth. You can go swimming!

Boat Canoeing paper with your own hands

This most complicated, therefore the most interesting model of the boat of paper. For its manufacture you will need the same square sheet as for the ship.

  1. Step 1: Fold all the corners to the center of the square and immediately deploy.
  2. Step 2: Fold the corners to the resulting bend lines.
  3. Step 3: Fold the resulting figures to the center and turn the sheet.
  4. Step 4: Generate the top and bottom side of the sheet to the center
  5. Step 5: Now start the corners to the center, so that triangles turned out on both sides.

Step 6: Walk the resulting triangles again. They will be crossed - it is necessary.

Step 7: Angles sticking up and down we do not need! We drive them to the center.

Step 8: The most difficult! Holding for two edges of the paper that came in the center and stretching them on the sides to turn out our boat inside out.

  • Step 9: The resulting boat can be left in this form, and you can raise the "roof" on two edges.

Interesting!!

The oldest canoe was found in the city of Pessa Netherlands. It dates back to 8000g BC!

Candy ships do it yourself

Another type of "decorative" shipbuilding is a gift "candy" boat. You too easily make it yourself. He will become an excellent gift for any holiday.

So how to make such beauty? To begin with, army for patience and the following components:

  • Polyfoam or polystyrene foam for hull
  • Corrugated paper of any color to your taste
  • Mesh or Organza for sails
  • Toothpicks, sticks, ships for mast and "fluffy"
  • And of course, candy. Here the choice is limited only by fantasy
  • We will also need scissors, glue (Cosmofen), a stationery knife and threads / ropes of different colors.

Let's start:

Step 1: Location the sizes of our future ship on expanded polystyrene. There should be 3 parts - two parts of the hull and feed.

  1. Step 2: Thoroughly glue parts of the case. After complete drying, you need to give the shape of the ship with a knife
  2. Step 3: Plug the boat of paper bending edges and sinking them.
  3. Step 4: Decorating the ship corners of the ship and glue the stern, while smoking it in advance.

Step 5: We glue the candies on the sides of the ship and on the stern. It is best to do this with a bilateral scotch.

Step 6: We collect masts from spedes or chopsticks. You will need two long and one short mast for the nasal part.

Step 7: We make sails: cut out two rectangular and one triangular piece of fabric. On the edge, they can be flashing tape. We sew them in the places shown in the picture.

Step 8: Install the masts and heat sails on them. Front sail stretch on cord between central and nasal masts.

  • Step 9: Between the masts, we have a treasure chest (a suitable box) filled with chocolate coins.

Step 10: Additionally, decorate the boat guided by fantasy only! After that, it can be done!

Wooden ship do it yourself

Another option of toy shipbuilding is a homemade shoe from a tree. Making it together with the child, you involve it in the most interesting world of crafts from the tree with your own hands.

The manufacturing process represents some difficulties, but everyone can repeat it.

For the manufacture you will need a jigsaw, PVA glue or any other, drill or screwdriver with a drill and some more materials necessary for the assembly.

Here is the easiest ship for drinking pubic:

For its manufacture, cut the shape from the usual board similar to the ship from the stern cut part to cut the recess for the "engine". At the edges of the excavation, glue two sticks. They will be attached to the gum.

For the manufacture of the engine, take the paneur and cut out two rectangles from it with rounded edges. Make in every detail cut to the center and insert them into each other.

Tension the gum on the resulting engine and secure it between chopsticks. Tighten the "engine" counterclockwise and put a boat on the water. The engine will be promoted and the ship sails.

Next, I will give a few drawings of homemade ships and their photos in the finished form. Drinking their details from thin plywood and collecting, you get models indistinguishable from real ships. The bottom is made of thin plywood strips and pasted on the frame.

Wooden ship do-it-yourself drawings

  1. After assembly, these ships are obtained.

Ship do-it-yourself photo

Boat do it yourself video video

Do not be discouraged if you do not work out. Below are video instructions with a detailed explanation for the manufacture of the most complex models.

  • Two-pipe motor ship:
  • Boat Canoeing:
  • Self-propelled wood boat:

A source: https://svoimi-rukam.ru/hand-made/korabl-svoimi-rukami/

Ships from candies with their own hands with step-by-step photos and video

Before the holidays and special events, many people have a dilemma, which will be presented to close people as a gift. We offer to surprise friends and family members with a spectacular original surprise made by their own hands - edible ship from candy.

Create a shoe shoe

Materials and tools that will be needed:

  • Two pieces of polystyrene foam of 35 × 16 cm and 16 × 10;
  • corrugated paper of different colors;
  • Mesh or rigid fabric size of 1 × 1.5 m;
  • Two types of braids with a length of 5 m and 1 cm wide and 3 cm;
  • twisted cord 6-7 m long;
  • Wooden spanks for canape (small and medium length);
  • glue and adhesive gun;
  • Candy of different shapes;
  • Gift bottle (optional);
  • double sided tape;
  • Sewing machine (or thread with needle).

On expanded polystyrene, you need to schedule a layout of the future ship. The size of the product depends on the selected bottle. The width of the hole in the upper part is equal to the width of the bottle, the width of the ship - at least twice as much. The third workpiece is the feed of the future ship - should be width, like previous parts, about 10-12 cm long.

Step-by-step photos will help in creating a ship.

Ship do-it-yourself: Step-by-step photo and master class for beginners

Building deck

When the parts of the vehicle base details are ready, go to the decoration of the hole for the bottle. From corrugated paper, it is necessary to cut a 2-3 cm rectangle larger than the width and length than the hole. Glue the resulting workpiece to the second part. From paper of the same color cut the triangle to close the bottom of the hole.

Note! The width of the workpiece should be wider than the hole to be able to heat the edges.

With the help of scissors gently make cuts along the corners of the workpiece and glue the edges of the paper to the ship layout.

Align the obtained parts and carefully proceed them. It is important to give glue to dry well.

Ship do-it-yourself: Step-by-step photo and master class for beginnersShip do-it-yourself: Step-by-step photo and master class for beginners

Grinding details

To give the product of the ship, take the battle knife and carefully remove the unnecessary angularity. Also neatly suzve the bottom of the stern, bringing your workshop to the real ship. The main thing is not to rearrange - the ship must remain stable.

Ship do-it-yourself: Step-by-step photo and master class for beginners

Ship decoration

To decorate the base of the ship, use corrugated paper. In width, it should be a pair of centimeters more than the height of the workpiece.

Plug better first with side sides to make a joke on the nose of the ship. On the tails of the remaining paper, take a few cuts, carefully bend it and stick to the bottom.

From the paper of the same color it is necessary to cut the decor for the top and bottom of the ship. Note that these parts must be a couple of millimeters less than the places where they need to be glued.

Ship do-it-yourself: Step-by-step photo and master class for beginnersShip do-it-yourself: Step-by-step photo and master class for beginners

Preparation of the foundation

To hide joints, use braid. For these purposes, take the transparent glue.

The edge of the opening of the bottle can be separated by a twisted cord. Do not be afraid in the process add some interesting elements. For example, you can bizarrely lay out the cord.

After the main part of the product is ready, it is necessary to prepare a stern. To do this, the third detail will enjoy the same paper as the main layout. Then go well to the feed to the base of the ship.

Ship do-it-yourself: Step-by-step photo and master class for beginnersShip do-it-yourself: Step-by-step photo and master class for beginners

Sweet decor

We begin to the most delicious part of the master class - decorating candy. With the help of glue or double-sided adhesion, post on the side parts of your ship somewhat suitable in the form and size of candies. Ideal for sweets in the form of coins and small domes.

It is possible to fully arrange with rectangular candies, and to place small square spareths around the perimeter of the upper part.

Ship do-it-yourself: Step-by-step photo and master class for beginnersShip do-it-yourself: Step-by-step photo and master class for beginners

Creating a mast

Three sails from the mesh tissue must be made, depending on the density of the material, it can be used in several layers. A large sail should be a little more wide than the ship, in a small one is approximately equal to the width of the base. The third workpiece must be cut in the form of a triangle.

After the mast layouts are cut, it is necessary to separate them with a tape along the edges and in the center. You can do it on a typewriter or manually, the main thing is to use small stitches.

Sails need to be folded and neatly fought. Large folds four times, small - in three, and triangular - in half. Then it is necessary to sew the triangular sail to bend, just do not forget to leave the rope cord. Another mast from the small skewer is placed on the nose of the ship.

To secure sails, you must take two long skewers and gently turn them through the cloth (do it with a large and small sail). Then the big sail is placed before the feed, and the little one is immediately behind the slot for the bottle. The triangular sail must be carefully tightened with a cord from mast with a small sail to the mast on the nose.

  • To hide the tip of the nasal mast, you can place a small checkbox on it.

So, the ship is almost ready to go to his big swimming, it remains only to place the last details. For example, you can position on the deck of treasure chest, mimic which can chocolate coins. Well, do not forget to put a bottle in the hole allotted for it.

That's all, the ship is ready. We are confident that such a product will not be able to leave anyone indifferent.

Video on the topic

  1. Video for the manufacture of candy ships:

A source: http://dekormyhome.ru/rukodelie/korabli-iz-konfet-svoimi-rykami-s-poshagovymi-foto-i-video.html

Candy ships. Master Class

  • All sails pre-exhibit from paper. Of course, it increases the time of work on the ship, but now
  • I need me, since all the sails I make an eye, pushing out the size of the base.
  • Sails consist of three rectangles. I start to "Cry" from the bottom, it coincides with the width of the ship, every
  • Subsequent already previous 2-4 cm (it all depends on the scale of the ship).
  • This ship has a lower sail - a sheet of A4 format, on medium mast - a little more
  • For the mast, I use extension cords for fishing rods from fiberglass (if necessary, you can trim under the desired size)
  • In order not to be seen flaws on the boards of the ship, I'm "dressing up."
  • With the help of conventional pins fix cardboard and cut it in size, not forgetting to mark the right and left side, "wrong" and
  • "Facial"
  • Fitting ships)))

Cardboard for the ships of the ship is at the tone of the polysilk or paper, if you wish - we are tightlying the grid.

  1. Somehow already said that the polysilk is better glued on the adhesive pencil, it does not spoil the film and allows you to change if necessary
  2. Her position.

Here it is "clothes" of our ship, its starving and facial ...

  • Do not forget that the basis also should be reappeted.
  • With the help of billets and hot glue, we find our foundation.
  • All the seams then close with a twisted cord.

Sails with hot glue with a metalassified tissue tape. Adhesive tape on both sides.

  1. It is for a long time, costly, but it is so possible to give additional rigidity to sails. Moreover, the organza is thin, and the dimensions
  2. I have big sails.
  3. This should not be done if the tissue is tougher, the sizes of sails are smaller or the tape itself is thicker, for example 1 cm
  4. Sails stroke through the wet gauze. Due to this glue is more evenly distributed, well, and the sails are acquired more
  5. Neat appearance.
  6. After stroking the sail, you can be slightly inserted in the right direction, stretching their edge between your fingers.
  7. And in your o'clock they are waiting for this state, "form", so to speak)))
  8. Sails glue with each other exactly how they will be located on the mast
  9. Glowing nail
  10. I suspect that normal people at this stage can use the human tool - awl)))
  11. I make a hot nail in the hole of the hole, it is in them a mast will be inserted.
  12. mast decorating paper in tone
  13. Make a rei, salabing them into the tone by sails
  14. Sails "We" Stand "on masts and glue rei, so that the sails hold the shape.
  15. Do not forget about the "nasal" triangular sail, and maybe even about a few))
  16. I am preparing a sweet filling of the ship
  17. Here are chocolate portholes.
  18. For the most beautiful, adding a twisted cord to the tone of the ship
  19. And this, my little "trumping" when attaching medals.
  20. The thing is that it is not always convenient to plant medals for glue, because the glue can bounce from the foil. So I'm "cunning"
  21. So:
  22. 1. On the medal I stick a piece of bilateral scotch (here it is exactly no problem with the fastening for foil)
  23. 2. Scotch glue a piece of paper, and Wu-a la))
  24. Lack of labor, fantasy, time)))
  25. And here is the result))

"Love is an unknown country, and we all float there each on your ship, and each of us on your ship is the captain and leads the ship to its own way ..."

A source: https://samodelych.ru/blog/43277180977/next

A bouquet of candy - ship. Master Class

expand

Master class from Murmancan.

For the base of the ship's body, we take a sheet of a fox (the storeable insulation of walls and ceilings).

Master class »SRC =" // mtdata.ru/u12/photoce9d/20943022088-0/original.jpg#20943022088 "ALT =" Bouquet of sweets - ship. Master class "/>

We make marking parts (we will need 4 parts of the fastener sheet for the ship with a height of 10 cm). The width of the plate is 20 cm, adjusting the length later. We make markup on the nose of the nose of the veil body feed.

For convenience on one plate, the damn triangle. The rest cut out the template.

Cut the nose of the housing on all 4-parts.

After folding all the blanks, align them with a knife.

The in-depth base for the bottle is done only in two upper parts, after simply bys the future trophy.

First cut on the top sheet.

Fitting.

We get 4 blanks.

Determine the desired length of the ship hull.

Of the two cut parts we make a side in the tail part of the ship.

We glue with each other 2 upper and 2 lower parts of the ship.

When parts will join, align them with a knife

Grind sandpaper.

Cut from corrugations upper case coating

From the golden corrugation cutting the coating for the hole in the case

We glue the corrugation to the extended parts of the ship.

We glue the gold grid with a gun and decorate all seams with a cord or braid.

On the side of the ship we glue the candy as a decor.

Decorating corrugation and candy bridge ship.

We collect.

Master class from Kengaru.

From the grid, I cut 3 trapezes height 40 cm, at the top of 7 cm, below 15

. Basps better to leave on the edge, so that then cut through the braid

It turns out 3 billets

We add to the vertical sections of the braid.

Cut the decorative grid - 5 cm wide, length in the length of the sail - 40 cm

Pin the golden mesh on the sail

We are tested on horizontal cuts. Together with the grid.

Fill over the line, where sails must be divided among themselves. Immote rei.

We press the folds of folds with pins and tighten the fold.

We take a skewer. You can wrap it with a gold ribbon, cord. You can paint. Nange the sail on the skewer. It is tight, so it is not necessary to further consolidate.

Install masts on the harvested case. Take up before fastening tightly. I put at an angle to the axis of the body. Check "Level".

Bring ropes-string or lace.

Aim - how to make triangular sails on the nose and stern.

Ready

http: //master -tzvetov.rf/konfeti/46-buket-iz-konfet-korabl-ma...

Did our site like? Join or subscribe (notifications about new topics will be received by mail) to our channel in Myrtessen!

1

Shows: 1 Coverage: 0 Reads: 0

A source: https://superersweetie.mirtesen.ru/blog/43656760569.

How I make my ships

Hello Masters and Master. This blog created at the request of girls, so I called mini MK, most likely it is some explanations in size, and I want to tell about some details of the process of making ships and sails.

Yes, MK a lot in the internet and I have already written about this before (someone will tell you that there is nothing new here ... ..), but I ask questions and it's not difficult for me to share the answers.

According to this template, I cut out the form from the fastener, before the ships were much "puzzled" (which I was not very pleased) - they did it because in all my ships, and more precisely inside the gift (you understand what))))) .O time the template changed-made a little already.

I hope sample sizes

This is how the lower part of the ship looks like. I am acknowledged by a knife, then a kosyachk or cutter (these are small knives for wood thread).

Of course this work is the most vigorous .........

Height - 8 cm.

The photo shows the glued 2 parts of 4 cm. Thick, then I cut the upper part-cover on the template. I bring the workpiece to the desired form, the dotted line showed that you can cut off the penplex at such an angle, but not just overdo it, because. You can make a hole))) (this is if you do a ship with a "filling" as in my case ... ..

Then they make a coarse-grained shredder (I make it over the bathroom, collecting large waste and throw out, and the petty simply wash the water, and there is practically no dust), lumplings with a shallow shock. The ship acquires a symmetrical shape, becomes flat.

Immediately I will say - the photo will be from different processes of making my ships. This is an example, what the glued blanks look like, which will then bring to mind ... ..

The height of the base of the ship - 12cm.

This gives templates of sails, I recently do this form, but you can also do rectangular (showed by a dotted line), indicated the sizes, maybe someone can be useful

I do sails from the grid, and from the organza, and always glue the edges on both sides, that and the shape holds and the sails are accurate. Thank you by Irina Tsibun for tips in her MK, sails fly through wet marla, then glue glues with materials (only Do not stand)

With the help of a soldering iron (acquired a price list in Fix), we burn the holes, they turn out to be even, neat and necessary size.

We use wooden spanks on masts, or plants (in the same fix price list they are) or an option in more preciously chucks to build fishing rods (in fishing stores). If the wands are short for mast, you can increase them, and wrapped the corrugated strips.

Put your ships in the corrugation, metallized corrugation, bamboo napkins-thanks to the hemp henochka for the idea with bamboo napkins

I use such a braid, narrow keeps masts, we decorate the details of the ship, and those that shrewd the stakes, thereby hiding all the shortcomings

Example, as a decorating gift compartment

Liked using lace

And such an option

  • Well, this is only part of the decor, which I decorate the ships. Here you can give the will of my fantasy))))))))
  • From the wire - it is possible to make the steering wheel, just from the hockey. medalka, and I also used souvenir medals, it also looks interesting

Decor

I will show how to fix candy.

It came to the conclusion that candy needs to be done in the holders loop, because When candy wanted to eat, an ugly hole is formed in their place, and whatever it would be, these places will close such loops (I think it looks much more aesthetic than a spoiled ship)

And such an option

So I do a loop: I turn around the candy with ribbon, whatever the candy without difficulty pulling the tape only among themselves, I do not stick to the candy. I stick to the cauldron, that's all

Sails on 1 photo tighten glue only corners among themselves, and you can fix it in a place where masts pass in the sails, you can also fix-wrapped under each sail narrow braid

A source: https://stranamasterov.ru/node/768342.

Devora loves the process of allowing ships. And, of course, the most avid in this matter - boys. This is the technique, as well as real ships, boats, yachts, boats and catamarans. Sea attributes of washed with a special romance that impresses a boyish soul.

Therefore, the ships can rightly be attributed to the category of toys for boys who will be interested in making themselves even the most restless tutor, and this, as you understand, a rare phenomenon, thereby very valuable.

Do you know how to make boats?

Do you know how to make a ship from paper to your son, grandson, any child? If the answer is negative, then the mercy ask you to read this useful article. Here you will find a description of different ways of making paper and not only, ships. Moreover, some options suggest the creation of an adult and a child. Let's remember simple models of paper ships that come from our distant childhood.

Ship in Origami

Like a paper plane, the manufacture of ships, which were allowed to water the Soviet children, involves the use of Origami technology, but in those distant years no one, of course, did not hear about it. As you guess looking at the photo of the finished ship, for the manufacture of it in the Origami technique we will need only a paper sheet.

You can apply the usual office paper in the size of the album sheet or use the notebook sheet. In the photo in front of you is intelligible and just the scheme illustrates a phased toy assembly.

The paper handicraft is quite strong to withstand the cargo like small plasticine men or toys from a kinder surprise.

To let the boat on the water, and settlement by the navigators, and can be pirates, this fascinating process will be remembered by a small person for a long time. On a white ship (it is assumed that your white paper handicraft) Draw the windows and different parts of the ship, such as the hold, steering wheel, feed, board boards, attach the plasticine anchor, attach the flag of colored cardboard or paper on the toothpick. Call these elements out loud to additionally develop curiosity into the child.

Manufacturing process

So let's start creating.

  1. A paper sheet of landscape format, white or any other color at your discretion takes.
  2. It takes shape half, it turns out a rectangular figure.
  3. Bend one of the corners to the center of the rectangle.
  4. Similarly, start the adjacent angle from the opposite side.
  5. The bottom is bend on top.
  6. Now turn the figure.
  7. Top rectangle, which is from below.
  8. Furies formed and fix internally.
  9. Formed a figure of rhombus.
  10. Next, raise the angle that below the opposite to the top.
  11. It is necessary to turn over and do the same on the other side.
  12. Raise the pointed corner that at the bottom.
  13. Next you need to get a rhombus by adding a triangle to the center.
  14. Start forming a boat by pulling out the ends.
  15. Purify the ship such a form so that it becomes volumetric and stable.

Ready!

Simple boat from traffic jams

Cork is one of the easiest, waterproof materials.

Such a craft will be interesting to do with the baby a preschool who loves to play in the water, swimming in the bathroom. This is an excellent alternative to dodder and other floating children's joy. And, naturally, in the spring, when the streams flow, your child will be delighted to run such a boat along the flow, and attract the child to the creative process, as it is very simple to make a ship from traffic jams. This occupation develops a shallow motorcy, tears the child to independence and, most importantly, introduces him with the joy of creativity.

Materials will require the following:

  1. Corks from wine bottles or from under champagne.
  2. Elastic bands for money or scotch.
  3. Colored paper or glossy unnecessary magazine.
  4. Toothpick or skeleton for canapse.

Creative process

  1. We fasten two jams with a rubber band.
  2. In the same way, we attach the third cork to the second.
  3. Received a steady raft.
  4. Cut from colored paper or from the old, unnecessary glossy magazine a bright sail.
  5. Fresh sail on the mast from a spanking or toothpick.
  6. Mast must be plugged into the plug.

Voila! Great toy is ready!

How to make a vehicle from a tree

We will need:

Sheet of paper, pencil, Board of linden or birch, Lobzik, Topor, chisels, rolls for rolls, toothpicks, Sails cloth, PVA glue, glue moment, Fire, Grinding disk

So, proceed:

  1. Cut the rectangle 18 to 6 cm in the shape of a ship (as if top view).
  2. We supply this billet on a wooden board with a width of about 2 cm.
  3. We cut two such details with an ordinary or electrolybik.
  4. Grind on one side from every detail.
  5. We glue them with each other with PVA glue, we fasten rubber bands for additional fixation, we pass the seam glue, we put the cargo on top.
  6. While the glue dries, we will make mast and other small details.
  7. We take a plate with a length of 15 cm, about 1 cm wide, we rinse with a knife, giving the shape of the cylinder, we are calculated with a file. It will be a mast. They make 3 pieces.
  8. From the nose of the ship, we retreat 3-4 cm and draw the line from the lower workpiece to the upper corner of the upper billet, it turns out as if the ship's nose of the ship.
  9. We scream over this line the extra material first on the one hand, then on the other.
  10. At the bottom of the boat, we spend two lines along the length, retreating from the edge of 2.5 cm.
  11. On these lines, cut the excess material with a hatch, thereby giving the nasal part of the ship a suitable form.
  12. Sharp the hatchet more accurately, removing excess material.
  13. Measure 4 cm from the stern of the ship, stake the line to the seam and sawing.
  14. The hull of the vessel is ready, polished it from all sides.
  15. At the top of the workpiece, where the deck will be alleged, black is rectangle.
  16. Take the chisel and make a deepening along the lines of the rectangle.
  17. Top of the ship are made of three holes.
  18. Take 3 masts. You can use wands for eating rolls and sushi as an alternative to self-made masts from the table.
  19. To each mast glue to 4 toothpicks on the glue moment.
  20. Fix the masts on the hull of the vessel with the help of PVA glue.
  21. Sails cut out of the fabric (there will be a coarse cloth, like burlap, if you plan to paint the ship in a dark color and cover with varnish) and glue on PVA.
  22. Cray to the vessel with acrylic paints. First, score with light colors, then dark. You can not paint, but to cover with a special wood varnish. It will be even more effectively.

Sailboat ready. It will not be ashamed to give or leave at home as an interior decoration.

Photo ideas of homemade ships

Such an aircraft like a boat created from paper with your own hands, even with a simple design causes interest. Most often, reproduce this product is not difficult. The main thing is to adhere to the recommendations provided in the instructions.

Brief content of the article:

Features crafts

Driving in the search engine "Photo craft crafts", the user receives several varieties of this creativity as a search result as a result.

Moreover, it can be classified as such products as a work technique (bonding, origami) and materials used.

As the latter, most often applied:

  • paper or cardboard;
  • Natural materials (leaves and bark of trees, twigs, shells, etc.).

Additionally, it is worth mentioning plasticine, from which you can make crafts of varying complexity. However, the final product in this case will not differ in durability and will require special storage conditions (temperature, humidity, etc.).

Paper ship

Paper craft crab can be performed as an applique or origami. In both techniques, manufacturing will not require a large number of materials and experience.

Applique

  • In this technique, the craft crab is created both from cardboard and paper. At the same time, natural materials will also look good (the leaves smoothed by iron straws). To make appliqué, you need:
  • Preparation Material (base - cardboard, plywood or sheet of plastic, glue, colored paper, scissors, ruler, pencil);
  • On paper of different colors, place the components of the future composition (sail, mast, boat, waves, sun, clouds);
  • Cut the marked parts;
  • alternately lubricating glue, attach each component on the basis;
  • give appliques to dry.

If desired, waves, sun and clouds can be drawn by markers or pencils, if it allows the basic material. The number of sails and small parts of the composition is adjusted if possible.

Origami

In order to make a crayon of a boat in such a technique as origami, it is enough to have a clean smooth sheet of paper at hand. Suitable as an ordinary notebook and album sheet.

To make the original durable ship, it is enough to be guided by a popular scheme. Namely:

  • cut the sheet of paper so that the square is the square;
  • fold the sheet in half;
  • Bend the corners of the lower edge towards the middle of the fold - the triangle will turn out;
  • Expand the triangle along the line of the initial fold - will be "envelope" from the sheet with curved corners;
  • fold square in half, bent edges inside;
  • repeat the procedure with the bending of the corners to the center of the bend;
  • To strengthen the product, the process of folding the square and reject corners must be repeated for the third time;
  • The resulting triangle is disclosed;
  • inside the bend to the outward bend the paper on both sides of the base of the triangle - the ship will acquire the desired appearance;
  • The corners formed inside the bend at the top of the triangle can also be bent, whether to make it, it turns out the pipes.

Ships from natural materials

Crafts from natural materials can be limited only by the found raw material and fantasy of the wizard. Leaves, branches, bumps, boards or bark will be perfectly in business. The main thing is to bore everything correctly. It is best to use glue for wood or, if the snaps are quite large, self-tapping screw.

Caples from seashells are distinguished by the longest life. Featuring a few seashells of suitable size (1 for deck, 2 for sails) and securely bonding them, you can get a simple sailboat.

If desired and accessibility of sufficient material, the ship may be more complex. It is possible to add seashells of different shapes and sizes, corals or rolled glass of glass.

In creating such crafts like a boat, regardless of the selected technology and manufacturing materials, it is important to take care of sufficient consolidation of the finished product. Whether it is an applique or bulk composition, you need glue, appropriate surface.

At the same time, it is desirable that when drying the adhesive composition does not remain traces. Ideally, you need a mixture becoming transparent when setting. Otherwise, the product may be spoiled.

Photos of ships

We also recommend viewing:

Добавить комментарий